[Snort-users] Snort 2.9.8.0 no --enable-zlib option

Gilbert, Sonia M CTR (US) sonia.m.gilbert.ctr at ...16010...
Thu Feb 4 19:20:33 EST 2016


Sorry forgot to include capture:
 Issued the configure:
./configure --with-libpcre-libraries=/usr/local/bin/pcre837/lib --with-libpcre-includes=/usr/local/bin/pcre837/include --enable-zlib --enable-gre --enable-mpls --disable-debug --enable-sourcefire  --enable-ppm  --disable-corefiles  --enable-react  --enable-flexresp3 --enable-large-pcap --enable-targetbased --enable-perfprofiling --enable-reload --disable-non-ether-decoders --enable-normalizer --enable-active-response

Abbreviated previous output:
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --enable-zlib

Configure help does not have an option for it:


[root at ...17445... snort-2.9.8.0]# ./configure -help
`configure' configures this package to adapt to many kinds of systems.

Usage: ./configure [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE.  See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:
  -h, --help              display this help and exit
      --help=short        display options specific to this package
      --help=recursive    display the short help of all the included packages
  -V, --version           display version information and exit
  -q, --quiet, --silent   do not print `checking ...' messages
      --cache-file=FILE   cache test results in FILE [disabled]
  -C, --config-cache      alias for `--cache-file=config.cache'
  -n, --no-create         do not create output files
      --srcdir=DIR        find the sources in DIR [configure dir or `..']

Installation directories:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [/usr/local]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [PREFIX]

By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc.  You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.

For better control, use the options below.

Fine tuning of the installation directories:
  --bindir=DIR            user executables [EPREFIX/bin]
  --sbindir=DIR           system admin executables [EPREFIX/sbin]
  --libexecdir=DIR        program executables [EPREFIX/libexec]
  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
  --libdir=DIR            object code libraries [EPREFIX/lib]
  --includedir=DIR        C header files [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
  --infodir=DIR           info documentation [DATAROOTDIR/info]
  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
  --mandir=DIR            man documentation [DATAROOTDIR/man]
  --docdir=DIR            documentation root [DATAROOTDIR/doc/PACKAGE]
  --htmldir=DIR           html documentation [DOCDIR]
  --dvidir=DIR            dvi documentation [DOCDIR]
  --pdfdir=DIR            pdf documentation [DOCDIR]
  --psdir=DIR             ps documentation [DOCDIR]

Program names:
  --program-prefix=PREFIX            prepend PREFIX to installed program names
  --program-suffix=SUFFIX            append SUFFIX to installed program names
  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names

System types:
  --build=BUILD     configure for building on BUILD [guessed]
  --host=HOST       cross-compile to build programs to run on HOST [BUILD]

Optional Features:
  --disable-option-checking  ignore unrecognized --enable/--with options
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --enable-silent-rules   less verbose build output (undo: "make V=1")
  --disable-silent-rules  verbose build output (undo: "make V=0")
  --enable-dependency-tracking
                          do not reject slow dependency extractors
  --disable-dependency-tracking
                          speeds up one-time build
  --enable-shared[=PKGS]  build shared libraries [default=yes]
  --enable-static[=PKGS]  build static libraries [default=yes]
  --enable-fast-install[=PKGS]
                          optimize for fast installation [default=yes]
  --disable-libtool-lock  avoid locking (might break parallel builds)
  --enable-64bit-gcc       Try to compile 64bit (only tested on Sparc Solaris 9 and 10).
  --enable-so-with-static-lib  Enable linking of dynamically loaded preprocessors with a static preprocessor library
  --enable-control-socket  Enable the control socket
  --enable-side-channel    Enable the side channel (Experimental)
  --disable-static-daq     Link static DAQ modules.
  --enable-build-dynamic-examples   Enable building of example dynamically loaded preprocessor and rule (off by default)
  --disable-dlclose        Only use if you are developing dynamic preprocessors or shared object rules.  Disable (--disable-dlclose) for testing valgrind leaks in dynamic libraries so a usable backtrace is reported.  Enabled by default.
  --disable-lzma           Disable LZMA Decompression
  --disable-gre            Disable GRE and IP in IP encapsulation support
  --disable-mpls           Disable MPLS support
  --disable-targetbased    Disable Target-Based Support in Stream, Frag, and Rules (adds pthread support implicitly)
  --disable-ppm            Disable packet/rule performance monitor
  --disable-perfprofiling  Disable preprocessor and rule performance profiling
  --enable-linux-smp-stats Enable statistics reporting through proc
  --enable-inline-init-failopen  Enable Fail Open during initialization for Inline Mode (adds pthread support implicitly)
  --disable-pthread        Disable pthread support
  --enable-debug-msgs      Enable debug printing options (bugreports and developers only)
  --enable-debug           Enable debugging options (bugreports and developers only)
  --enable-gdb             Enable gdb debugging information
  --enable-profile         Enable profiling options (developers only)
  --enable-test-coverage   Enable gcov test coverage tracking (developers only)
  --disable-ppm-test       Disable packet/rule performance monitor
  --enable-sourcefire      Enable Sourcefire specific build options, encompasing --enable-perfprofiling and --enable-ppm
  --disable-corefiles      Prevent Snort from generating core files
  --disable-active-response Disable reject injection
  --disable-normalizer     Disable packet/stream normalizations
  --disable-reload         Disable reloading a configuration without restarting
  --disable-reload-error-restart   Disable restarting on reload error
  --enable-ha              Enable high-availability state sharing (Experimental)
  --enable-non-ether-decoders  Enable non Ethernet decoders.
  --disable-react          Disable interception and termination of offending HTTP accesses
  --disable-flexresp3      Disable flexible responses (v3) on hostile connection attempts
  --enable-intel-soft-cpm  Enable Intel Soft CPM support
  --enable-shared-rep      Enable use of Shared Memory for Reputation (Linux only)
  --enable-large-pcap      Enable support for pcaps larger than 2 GB
  --enable-file-inspect   Build with extended file inspection features.
                          (Experimental)
  --enable-open-appid     Build with application id support. (Experimental)

Optional Packages:
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
                          both]
  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
  --with-sysroot=DIR Search for dependent libraries within DIR
                        (or the compiler's sysroot if not specified).
  --with-libpcap-includes=DIR    libpcap include directory
  --with-libpcap-libraries=DIR   libpcap library directory
  --with-libpfring-includes=DIR  libpfring include directory
  --with-libpfring-libraries=DIR libpfring library directory
  --with-daq-includes=DIR        DAQ include directory
  --with-daq-libraries=DIR       DAQ library directory
  --with-libpcre-includes=DIR    libpcre include directory
  --with-libpcre-libraries=DIR   libpcre library directory
  --with-openssl-includes=DIR    openssl include directory
  --with-openssl-libraries=DIR   openssl library directory
  --with-dnet-includes=DIR       libdnet include directory
  --with-dnet-libraries=DIR      libdnet library directory
  --with-lzma-includes=DIR       liblzma include directory
  --with-lzma-libraries=DIR      liblzma library directory
  --with-intel-soft-cpm-includes=DIR      Intel Soft CPM include directory
  --with-intel-soft-cpm-libraries=DIR     Intel Soft CPM library directory

Some influential environment variables:
  CC          C compiler command
  CFLAGS      C compiler flags
  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
              nonstandard directory <lib dir>
  LIBS        libraries to pass to the linker, e.g. -l<library>
  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
              you have headers in a nonstandard directory <include dir>
  CPP         C preprocessor
  SIGNAL_SNORT_RELOAD
              set the SIGNAL_SNORT_RELOAD value
  SIGNAL_SNORT_DUMP_STATS
              set the SIGNAL_SNORT_DUMP_STATS value
  SIGNAL_SNORT_ROTATE_STATS
              set the SIGNAL_SNORT_ROTATE_STATS value
  SIGNAL_SNORT_READ_ATTR_TBL
              set the SIGNAL_SNORT_READ_ATTR_TBL value
  PKG_CONFIG  path to pkg-config utility
  PKG_CONFIG_PATH
              directories to add to pkg-config's search path
  PKG_CONFIG_LIBDIR
              path overriding pkg-config's built-in search path
  luajit_CFLAGS
              C compiler flags for luajit, overriding pkg-config
  luajit_LIBS linker flags for luajit, overriding pkg-config

Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.

Report bugs to the package provider.
[root at ...17445... snort-2.9.8.0]#

-----Original Message-----
From: Gilbert, Sonia M CTR (US) 
Sent: Thursday, February 04, 2016 2:17 PM
To: 'Snort-users at lists.sourceforge.net' <Snort-users at lists.sourceforge.net>
Subject: Snort 2.9.8.0 no --enable-zlib option

Dear Snort Community,

I am trying to install Snort 2.9.8.0 and get the following warning:
configure: WARNING: unrecognized options: --enable-zlib

Was zlib replaced by utility?  

Sonia Gilbert
Regional Cyber Center-Pacific, CTR
Defensive Cyber Operations Division
(808) 438-0513
NIPR:  Sonia.m.gilbert.ctr at ...16010...





More information about the Snort-users mailing list