[Snort-users] Snort-users Digest, Vol 106, Issue 43

Anthony Gallina anthonygallina1 at ...11827...
Wed Mar 18 12:45:43 EDT 2015


Yes Michael Steele

I think this is the version that my Ubuntu Software center installed. Is
that what is keeping me from connecting to the MySQL data base. Or is it a
configuration problem?

                                       Thank you

On Mon, Mar 16, 2015 at 1:09 PM, <snort-users-request at lists.sourceforge.net>
wrote:

> Send Snort-users mailing list submissions to
>         snort-users at lists.sourceforge.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         https://lists.sourceforge.net/lists/listinfo/snort-users
> or, via email, send a message with subject or body 'help' to
>         snort-users-request at lists.sourceforge.net
>
> You can reach the person managing the list at
>         snort-users-owner at lists.sourceforge.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Snort-users digest..."
>
>
> When responding, please don't respond with the entire Digest.  Please trim
> your response.
>
> Today's Topics:
>
>    1. Re: I could use help getting my snort pulled      pork    barnyard2
>       BASE running (Michael Steele)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 16 Mar 2015 16:09:45 -0400
> From: "Michael Steele" <michaels at ...9077...>
> Subject: Re: [Snort-users] I could use help getting my snort pulled
>         pork    barnyard2 BASE running
> To: "'Anthony Gallina'" <anthonygallina1 at ...11827...>,
>         <snort-users at lists.sourceforge.net>
> Message-ID: <000401d06025$263ad270$72b07750$@winsnort.com>
> Content-Type: text/plain; charset="utf-8"
>
> Is there a reason why you are running such an old version of Snort?
>
>
>
> Best regards,
>
> Michael...
>
>
>
> WINSNORT.com Management?
>
> --
>
> ******************** Established ~ 2002 **********************
>
> * FREE Windows Intrusion Detection System (WinIDS) Tutorials *
>
> *            ~~ FREE Windows Support Forums ~~               *
>
> *               Visit @ http://winsnort.com <http://winsnort.com/>
>            *
>
> *     Snort: Open Source Network IDS - http://snort.org <http://snort.org/>
>      *
>
> **************************************************************
>
>
>
> From: Anthony Gallina [mailto:anthonygallina1 at ...11827...]
> Sent: Monday, March 16, 2015 2:22 PM
> To: snort-users at lists.sourceforge.net
> Cc: anthonygallina1 at ...11827...
> Subject: [Snort-users] I could use help getting my snort pulled pork
> barnyard2 BASE running
>
>
>
> Hello
>
> I am having difficulty getting my snort pulled pork barnyard2 and base
> running.
>
> It seems as if snort and pulled pork are running good they are in
> /etc/snort that is where all of my config files are.
>
> My version is Version 2.9.6.0 GRE (Build 47) The barnyard ver is barnyard
> 2-2-1.13. This is on a Ubuntu 14.04 system
>
> so most commands need to be ran with sudo.  I dont seem to be getting
> anything in my MySQL data base. And not sure
>
> how to fix this.  Assistance will be greatly appreciated.
>
> My snort config looks like this
>
> #--------------------------------------------------
> #   VRT Rule Packages Snort.conf
> #
> #   For more information visit us at:
> #     http://www.snort.org                   Snort Website
> #     http://vrt-blog.snort.org/    Sourcefire VRT Blog
> #
> #     Mailing list Contact:      snort-sigs at lists.sourceforge.net <mailto:
> snort-sigs at lists.sourceforge.net>
> #     False Positive reports:    fp at ...1935... <mailto:
> fp at ...1935...>
> #     Snort bugs:                bugs at ...950... <mailto:bugs at ...950...>
> #
> #     Compatible with Snort Versions:
> #     VERSIONS : 2.9.6.0
> #
> #     Snort build options:
> #     OPTIONS : --enable-gre --enable-mpls --enable-targetbased
> --enable-ppm --enable-perfprofiling --enable-zlib --enable-active-response
> --enable-normalizer --enable-reload --enable-react --enable-flexresp3
> #
> #     Additional information:
> #     This configuration file enables active response, to run snort in
> #     test mode -T you are required to supply an interface -i <interface>
> #     or test mode will fail to fully validate the configuration and
> #     exit with a FATAL error
> #--------------------------------------------------
>
> ###################################################
> # This file contains a sample snort configuration.
> # You should take the following steps to create your own custom
> configuration:
> #
> #  1) Set the network variables.
> #  2) Configure the decoder
> #  3) Configure the base detection engine
> #  4) Configure dynamic loaded libraries
> #  5) Configure preprocessors
> #  6) Configure output plugins
> #  7) Customize your rule set
> #  8) Customize preprocessor and decoder rule set
> #  9) Customize shared object rule set
> ###################################################
>
> ###################################################
> # Step #1: Set the network variables.  For more information, see
> README.variables
> ###################################################
>
> # Setup the network addresses you are protecting
> #
> # Note to Debian users: this value is overriden when starting
> # up the Snort daemon through the init.d script by the
> # value of DEBIAN_SNORT_HOME_NET s defined in the
> # /etc/snort/snort.debian.conf configuration file
> #
> ipvar HOME_NET 192.168.1.0/24 <http://192.168.1.0/24>
>
> # Set up the external network addresses. Leave as "any" in most situations
> ipvar EXTERNAL_NET any
> # If HOME_NET is defined as something other than "any", alternative, you
> can
> # use this definition if you do not want to detect attacks from your
> internal
> # IP addresses:
> #ipvar EXTERNAL_NET !$HOME_NET
>
> # List of DNS servers on your network
> ipvar DNS_SERVERS $HOME_NET
>
> # List of SMTP servers on your network
> ipvar SMTP_SERVERS $HOME_NET
>
> # List of web servers on your network
> ipvar HTTP_SERVERS $HOME_NET
>
> # List of sql servers on your network
> ipvar SQL_SERVERS $HOME_NET
>
> # List of telnet servers on your network
> ipvar TELNET_SERVERS $HOME_NET
>
> # List of ssh servers on your network
> ipvar SSH_SERVERS $HOME_NET
>
> # List of ftp servers on your network
> ipvar FTP_SERVERS $HOME_NET
>
> # List of sip servers on your network
> ipvar SIP_SERVERS $HOME_NET
>
> # List of ports you run web servers on
> portvar HTTP_PORTS
> [36,80,81,82,83,84,85,86,87,88,89,90,311,383,555,591,593,631,801,808,818,901,972,1158,1220,1414,1533,1741,1830,2231,2301,2381,2809,3029,3037,3057,3128,3443,3702,4000,4343,4848,5117,5250,6080,6173,6988,7000,7001,7144,7145,7510,7770,7777,7779,8000,8008,8014,8028,8080,8081,8082,8085,8088,8090,8118,8123,8180,8181,8222,8243,8280,8300,8500,8509,8800,8888,8899,9000,9060,9080,9090,9091,9111,9443,9999,10000,11371,12601,15489,29991,33300,34412,34443,34444,41080,44449,50000,50002,51423,53331,55252,55555,56712]
>
> # List of ports you want to look for SHELLCODE on.
> portvar SHELLCODE_PORTS !80
>
> # List of ports you might see oracle attacks on
> portvar ORACLE_PORTS 1024:
>
> # List of ports you want to look for SSH connections on:
> portvar SSH_PORTS 22
>
> # List of ports you run ftp servers on
> portvar FTP_PORTS [21,2100,3535]
>
> # List of ports you run SIP servers on
> portvar SIP_PORTS [5060,5061,5600]
>
> # List of file data ports for file inspection
> portvar FILE_DATA_PORTS [$HTTP_PORTS,110,143]
>
> # List of GTP ports for GTP preprocessor
> portvar GTP_PORTS [2123,2152,3386]
>
> # other variables, these should not be modified
> ipvar AIM_SERVERS [
> 64.12.24.0/23,64.12.28.0/23,64.12.161.0/24,64.12.163.0/24,64.12.200.0/24,205.188.3.0/24,205.188.5.0/24,205.188.7.0/24,205.188.9.0/24,205.188.153.0/24,205.188.179.0/24,205.188.248.0/24
> <
> http://64.12.24.0/23,64.12.28.0/23,64.12.161.0/24,64.12.163.0/24,64.12.200.0/24,205.188.3.0/24,205.188.5.0/24,205.188.7.0/24,205.188.9.0/24,205.188.153.0/24,205.188.179.0/24,205.188.248.0/24>
> ]
>
> # Path to your rules files (this can be a relative path)
> # Note for Windows users:  You are advised to make this an absolute path,
> # such as:  c:\snort\rules
> var RULE_PATH /etc/snort/rules
> var SO_RULE_PATH /etc/snort/so_rules
> var PREPROC_RULE_PATH /etc/snort/preproc_rules
>
> # If you are using reputation preprocessor set these
> # Currently there is a bug with relative paths, they are relative to where
> snort is
> # not relative to snort.conf like the above variables
> # This is completely inconsistent with how other vars work, BUG 89986
> # Set the absolute path appropriately
> #var WHITE_LIST_PATH /etc/snort/rules
> var BLACK_LIST_PATH /etc/snort/rules
>
> ###################################################
> # Step #2: Configure the decoder.  For more information, see README.decode
> ###################################################
>
> # Stop generic decode events:
> config disable_decode_alerts
>
> # Stop Alerts on experimental TCP options
> config disable_tcpopt_experimental_alerts
>
> # Stop Alerts on obsolete TCP options
> config disable_tcpopt_obsolete_alerts
>
> # Stop Alerts on T/TCP alerts
> config disable_tcpopt_ttcp_alerts
>
> # Stop Alerts on all other TCPOption type events:
> config disable_tcpopt_alerts
>
> # Stop Alerts on invalid ip options
> config disable_ipopt_alerts
>
> # Alert if value in length field (IP, TCP, UDP) is greater th elength of
> the packet
> # config enable_decode_oversized_alerts
>
> # Same as above, but drop packet if in Inline mode (requires
> enable_decode_oversized_alerts)
> # config enable_decode_oversized_drops
>
> # Configure IP / TCP checksum mode
> config checksum_mode: all
>
> # Configure maximum number of flowbit references.  For more information,
> see README.flowbits
> # config flowbits_size: 64
>
> # Configure ports to ignore
> # config ignore_ports: tcp 21 6667:6671 1356
> # config ignore_ports: udp 1:17 53
>
> # Configure active response for non inline operation. For more
> information, see REAMDE.active
> # config response: eth0 attempts 2
>
> # Configure DAQ related options for inline operation. For more
> information, see README.daq
> #
> # config daq: <type>
> # config daq_dir: <dir>
> # config daq_mode: <mode>
> # config daq_var: <var>
> #
> # <type> ::= pcap | afpacket | dump | nfq | ipq | ipfw
> # <mode> ::= read-file | passive | inline
> # <var> ::= arbitrary <name>=<value passed to DAQ
> # <dir> ::= path as to where to look for DAQ module so's
>
> # Configure specific UID and GID to run snort as after dropping privs. For
> more information see snort -h command line options
> #
> # config set_gid:
> # config set_uid:
>
> # Configure default snaplen. Snort defaults to MTU of in use interface.
> For more information see README
> #
> # config snaplen:
> #
>
> # Configure default bpf_file to use for filtering what traffic reaches
> snort. For more information see snort -h command line options (-F)
> #
> # config bpf_file:
> #
>
> # Configure default log directory for snort to log to.  For more
> information see snort -h command line options (-l)
> #
> # config logdir:
>
>
> ###################################################
> # Step #3: Configure the base detection engine.  For more information,
> see  README.decode
> ###################################################
>
> # Configure PCRE match limitations
> config pcre_match_limit: 3500
> config pcre_match_limit_recursion: 1500
>
> # Configure the detection engine  See the Snort Manual, Configuring Snort
> - Includes - Config
> config detection: search-method ac-split search-optimize max-pattern-len 20
>
> # Configure the event queue.  For more information, see README.event_queue
> config event_queue: max_queue 8 log 5 order_events content_length
>
> ###################################################
> ## Configure GTP if it is to be used.
> ## For more information, see README.GTP
> ####################################################
>
> # config enable_gtp
>
> ###################################################
> # Per packet and rule latency enforcement
> # For more information see README.ppm
> ###################################################
>
> # Per Packet latency configuration
> #config ppm: max-pkt-time 250, \
> #   fastpath-expensive-packets, \
> #   pkt-log
>
> # Per Rule latency configuration
> #config ppm: max-rule-time 200, \
> #   threshold 3, \
> #   suspend-expensive-rules, \
> #   suspend-timeout 20, \
> #   rule-log alert
>
> ###################################################
> # Configure Perf Profiling for debugging
> # For more information see README.PerfProfiling
> ###################################################
>
> #config profile_rules: print all, sort avg_ticks
> #config profile_preprocs: print all, sort avg_ticks
>
> ###################################################
> # Configure protocol aware flushing
> # For more information see README.stream5
> ###################################################
> config paf_max: 16000
>
> ###################################################
> # Step #4: Configure dynamic loaded libraries.
> # For more information, see Snort Manual, Configuring Snort - Dynamic
> Modules
> ###################################################
>
> # path to dynamic preprocessor libraries
> dynamicpreprocessor directory /usr/lib/snort_dynamicpreprocessor/
>
> # path to base preprocessor engine
> dynamicengine /usr/lib/snort_dynamicengine/libsf_engine.so
>
> # path to dynamic rules libraries
> dynamicdetection directory /usr/lib/snort_dynamicrules
>
> ###################################################
> # Step #5: Configure preprocessors
> # For more information, see the Snort Manual, Configuring Snort -
> Preprocessors
> ###################################################
>
> # GTP Control Channle Preprocessor. For more information, see README.GTP
> # preprocessor gtp: ports { 2123 3386 2152 }
>
> # Inline packet normalization. For more information, see README.normalize
> # Does nothing in IDS mode
> preprocessor normalize_ip4
> preprocessor normalize_tcp: ips ecn stream
> preprocessor normalize_icmp4
> preprocessor normalize_ip6
> preprocessor normalize_icmp6
>
> # Target-based IP defragmentation.  For more inforation, see README.frag3
> preprocessor frag3_global: max_frags 65536
> preprocessor frag3_engine: policy windows detect_anomalies overlap_limit
> 10 min_fragment_length 100 timeout 180
>
> # Target-Based stateful inspection/stream reassembly.  For more
> inforation, see README.stream5
> preprocessor stream5_global: track_tcp yes, \
>    track_udp yes, \
>    track_icmp no, \
>    max_tcp 262144, \
>    max_udp 131072, \
>    max_active_responses 2, \
>    min_response_seconds 5
> preprocessor stream5_tcp: policy windows, detect_anomalies, require_3whs
> 180, \
>    overlap_limit 10, small_segments 3 bytes 150, timeout 180, \
>     ports client 21 22 23 25 42 53 70 79 109 110 111 113 119 135 136 137
> 139 143 \
>         161 445 513 514 587 593 691 1433 1521 1741 2100 3306 6070 6665
> 6666 6667 6668 6669 \
>         7000 8181 32770 32771 32772 32773 32774 32775 32776 32777 32778
> 32779, \
>     ports both 36 80 81 82 83 84 85 86 87 88 89 90 110 311 383 443 465 563
> 555 591 593 631 636 801 808 818 901 972 989 992 993 994 995 1158 1220 1414
> 1533 1741 1830 2231 2301 2381 2809 3029 3037 3057 3128 3443 3702 4000 4343
> 4848 5117 5250 6080 6173 6988 7907 7000 7001 7144 7145 7510 7802 7770 7777
> 7779 \
>         7801 7900 7901 7902 7903 7904 7905 7906 7908 7909 7910 7911 7912
> 7913 7914 7915 7916 \
>         7917 7918 7919 7920 8000 8008 8014 8028 8080 8081 8082 8085 8088
> 8090 8118 8123 8180 8181 8222 8243 8280 8300 8500 8509 8800 8888 8899 9000
> 9060 9080 9090 9091 9111 9443 9999 10000 11371 12601 15489 29991 33300
> 34412 34443 34444 41080 44449 50000 50002 51423 53331 55252 55555 56712
> preprocessor stream5_udp: timeout 180
>
> # performance statistics.  For more information, see the Snort Manual,
> Configuring Snort - Preprocessors - Performance Monitor
> # preprocessor perfmonitor: time 300 file /var/snort/snort.stats pktcnt
> 10000
>
> # HTTP normalization and anomaly detection.  For more information, see
> README.http_inspect
> preprocessor http_inspect: global iis_unicode_map unicode.map 1252
> compress_depth 65535 decompress_depth 65535 max_gzip_mem 104857600
> preprocessor http_inspect_server: server default \
>     http_methods { GET POST PUT SEARCH MKCOL COPY MOVE LOCK UNLOCK NOTIFY
> POLL BCOPY BDELETE BMOVE LINK UNLINK OPTIONS HEAD DELETE TRACE TRACK
> CONNECT SOURCE SUBSCRIBE UNSUBSCRIBE PROPFIND PROPPATCH BPROPFIND
> BPROPPATCH RPC_CONNECT PROXY_SUCCESS BITS_POST CCM_POST SMS_POST
> RPC_IN_DATA RPC_OUT_DATA RPC_ECHO_DATA } \
>     chunk_length 500000 \
>     server_flow_depth 0 \
>     client_flow_depth 0 \
>     post_depth 65495 \
>     oversize_dir_length 500 \
>     max_header_length 750 \
>     max_headers 100 \
>     max_spaces 200 \
>     small_chunk_length { 10 5 } \
>     ports { 36 80 81 82 83 84 85 86 87 88 89 90 311 383 555 591 593 631
> 801 808 818 901 972 1158 1220 1414 1741 1830 2231 2301 2381 2809 3029 3037
> 3057 3128 3443 3702 4000 4343 4848 5117 5250 6080 6173 6988 7000 7001 7144
> 7145 7510 7770 7777 7779 8000 8008 8014 8028 8080 8081 8082 8085 8088 8090
> 8118 8123 8180 8181 8222 8243 8280 8300 8500 8509 8800 8888 8899 9000 9060
> 9080 9090 9091 9111 9443 9999 10000 11371 12601 15489 29991 33300 34412
> 34443 34444 41080 44449 50000 50002 51423 53331 55252 55555 56712 } \
>     non_rfc_char { 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 } \
>     enable_cookie \
>     extended_response_inspection \
>     inspect_gzip \
>     normalize_utf \
>     unlimited_decompress \
>     normalize_javascript \
>     apache_whitespace no \
>     ascii no \
>     bare_byte no \
>     directory no \
>     double_decode no \
>     iis_backslash no \
>     iis_delimiter no \
>     iis_unicode no \
>     multi_slash no \
>     utf_8 no \
>     u_encode yes \
>     webroot no
>
> # ONC-RPC normalization and anomaly detection.  For more information, see
> the Snort Manual, Configuring Snort - Preprocessors - RPC Decode
> preprocessor rpc_decode: 111 32770 32771 32772 32773 32774 32775 32776
> 32777 32778 32779 no_alert_multiple_requests no_alert_large_fragments
> no_alert_incomplete
>
> # Back Orifice detection.
> preprocessor bo
>
> # FTP / Telnet normalization and anomaly detection.  For more information,
> see README.ftptelnet
> preprocessor ftp_telnet: global inspection_type stateful encrypted_traffic
> no check_encrypted
> preprocessor ftp_telnet_protocol: telnet \
>     ayt_attack_thresh 20 \
>     normalize ports { 23 } \
>     detect_anomalies
> preprocessor ftp_telnet_protocol: ftp server default \
>     def_max_param_len 100 \
>     ports { 21 2100 3535 } \
>     telnet_cmds yes \
>     ignore_telnet_erase_cmds yes \
>     ftp_cmds { ABOR ACCT ADAT ALLO APPE AUTH CCC CDUP } \
>     ftp_cmds { CEL CLNT CMD CONF CWD DELE ENC EPRT } \
>     ftp_cmds { EPSV ESTA ESTP FEAT HELP LANG LIST LPRT } \
>     ftp_cmds { LPSV MACB MAIL MDTM MIC MKD MLSD MLST } \
>     ftp_cmds { MODE NLST NOOP OPTS PASS PASV PBSZ PORT } \
>     ftp_cmds { PROT PWD QUIT REIN REST RETR RMD RNFR } \
>     ftp_cmds { RNTO SDUP SITE SIZE SMNT STAT STOR STOU } \
>     ftp_cmds { STRU SYST TEST TYPE USER XCUP XCRC XCWD } \
>     ftp_cmds { XMAS XMD5 XMKD XPWD XRCP XRMD XRSQ XSEM } \
>     ftp_cmds { XSEN XSHA1 XSHA256 } \
>     alt_max_param_len 0 { ABOR CCC CDUP ESTA FEAT LPSV NOOP PASV PWD QUIT
> REIN STOU SYST XCUP XPWD } \
>     alt_max_param_len 200 { ALLO APPE CMD HELP NLST RETR RNFR STOR STOU
> XMKD } \
>     alt_max_param_len 256 { CWD RNTO } \
>     alt_max_param_len 400 { PORT } \
>     alt_max_param_len 512 { SIZE } \
>     chk_str_fmt { ACCT ADAT ALLO APPE AUTH CEL CLNT CMD } \
>     chk_str_fmt { CONF CWD DELE ENC EPRT EPSV ESTP HELP } \
>     chk_str_fmt { LANG LIST LPRT MACB MAIL MDTM MIC MKD } \
>     chk_str_fmt { MLSD MLST MODE NLST OPTS PASS PBSZ PORT } \
>     chk_str_fmt { PROT REST RETR RMD RNFR RNTO SDUP SITE } \
>     chk_str_fmt { SIZE SMNT STAT STOR STRU TEST TYPE USER } \
>     chk_str_fmt { XCRC XCWD XMAS XMD5 XMKD XRCP XRMD XRSQ } \
>     chk_str_fmt { XSEM XSEN XSHA1 XSHA256 } \
>     cmd_validity ALLO < int [ char R int ] > \
>     cmd_validity EPSV < [ { char 12 | char A char L char L } ] > \
>     cmd_validity MACB < string > \
>     cmd_validity MDTM < [ date nnnnnnnnnnnnnn[.n[n[n]]] ] string > \
>     cmd_validity MODE < char ASBCZ > \
>     cmd_validity PORT < host_port > \
>     cmd_validity PROT < char CSEP > \
>     cmd_validity STRU < char FRPO [ string ] > \
>     cmd_validity TYPE < { char AE [ char NTC ] | char I | char L [ number
> ] } >
> preprocessor ftp_telnet_protocol: ftp client default \
>     max_resp_len 256 \
>     bounce yes \
>     ignore_telnet_erase_cmds yes \
>     telnet_cmds yes
>
>
> # SMTP normalization and anomaly detection.  For more information, see
> README.SMTP
> preprocessor smtp: ports { 25 465 587 691 } \
>     inspection_type stateful \
>     b64_decode_depth 0 \
>     qp_decode_depth 0 \
>     bitenc_decode_depth 0 \
>     uu_decode_depth 0 \
>     log_mailfrom \
>     log_rcptto \
>     log_filename \
>     log_email_hdrs \
>     normalize cmds \
>     normalize_cmds { ATRN AUTH BDAT CHUNKING DATA DEBUG EHLO EMAL ESAM
> ESND ESOM ETRN EVFY } \
>     normalize_cmds { EXPN HELO HELP IDENT MAIL NOOP ONEX QUEU QUIT RCPT
> RSET SAML SEND SOML } \
>     normalize_cmds { STARTTLS TICK TIME TURN TURNME VERB VRFY X-ADAT
> X-DRCP X-ERCP X-EXCH50 } \
>     normalize_cmds { X-EXPS X-LINK2STATE XADR XAUTH XCIR XEXCH50 XGEN
> XLICENSE XQUE XSTA XTRN XUSR } \
>     max_command_line_len 512 \
>     max_header_line_len 1000 \
>     max_response_line_len 512 \
>     alt_max_command_line_len 260 { MAIL } \
>     alt_max_command_line_len 300 { RCPT } \
>     alt_max_command_line_len 500 { HELP HELO ETRN EHLO } \
>     alt_max_command_line_len 255 { EXPN VRFY ATRN SIZE BDAT DEBUG EMAL
> ESAM ESND ESOM EVFY IDENT NOOP RSET } \
>     alt_max_command_line_len 246 { SEND SAML SOML AUTH TURN ETRN DATA RSET
> QUIT ONEX QUEU STARTTLS TICK TIME TURNME VERB X-EXPS X-LINK2STATE XADR
> XAUTH XCIR XEXCH50 XGEN XLICENSE XQUE XSTA XTRN XUSR } \
>     valid_cmds { ATRN AUTH BDAT CHUNKING DATA DEBUG EHLO EMAL ESAM ESND
> ESOM ETRN EVFY } \
>     valid_cmds { EXPN HELO HELP IDENT MAIL NOOP ONEX QUEU QUIT RCPT RSET
> SAML SEND SOML } \
>     valid_cmds { STARTTLS TICK TIME TURN TURNME VERB VRFY X-ADAT X-DRCP
> X-ERCP X-EXCH50 } \
>     valid_cmds { X-EXPS X-LINK2STATE XADR XAUTH XCIR XEXCH50 XGEN XLICENSE
> XQUE XSTA XTRN XUSR } \
>     xlink2state { enabled }
>
> # Portscan detection.  For more information, see README.sfportscan
> # preprocessor sfportscan: proto  { all } memcap { 10000000 } sense_level
> { low }
>
> # ARP spoof detection.  For more information, see the Snort Manual -
> Configuring Snort - Preprocessors - ARP Spoof Preprocessor
> # preprocessor arpspoof
> # preprocessor arpspoof_detect_host: 192.168.40.1 f0:0f:00:f0:0f:00
>
> # SSH anomaly detection.  For more information, see README.ssh
> preprocessor ssh: server_ports { 22 } \
>                   autodetect \
>                   max_client_bytes 19600 \
>                   max_encrypted_packets 20 \
>                   max_server_version_len 100 \
>                   enable_respoverflow enable_ssh1crc32 \
>                   enable_srvoverflow enable_protomismatch
>
> # SMB / DCE-RPC normalization and anomaly detection.  For more
> information, see README.dcerpc2
> preprocessor dcerpc2: memcap 102400, events [co ]
> preprocessor dcerpc2_server: default, policy WinXP, \
>     detect [smb [139,445], tcp 135, udp 135, rpc-over-http-server 593], \
>     autodetect [tcp 1025:, udp 1025:, rpc-over-http-server 1025:], \
>     smb_max_chain 3, smb_invalid_shares ["C$", "D$", "ADMIN$"]
>
> # DNS anomaly detection.  For more information, see README.dns
> preprocessor dns: ports { 53 } enable_rdata_overflow
>
> # SSL anomaly detection and traffic bypass.  For more information, see
> README.ssl
> preprocessor ssl: ports { 443 465 563 636 989 992 993 994 995 7801 7802
> 7900 7901 7902 7903 7904 7905 7906 7907 7908 7909 7910 7911 7912 7913 7914
> 7915 7916 7917 7918 7919 7920 }, trustservers, noinspect_encrypted
>
> # SDF sensitive data preprocessor.  For more information see
> README.sensitive_data
> preprocessor sensitive_data: alert_threshold 25
>
> # SIP Session Initiation Protocol preprocessor.  For more information see
> README.sip
> preprocessor sip: max_sessions 40000, \
>    ports { 5060 5061 5600 }, \
>    methods { invite \
>              cancel \
>              ack \
>              bye \
>              register \
>              options \
>              refer \
>              subscribe \
>              update \
>              join \
>              info \
>              message \
>              notify \
>              benotify \
>              do \
>              qauth \
>              sprack \
>              publish \
>              service \
>              unsubscribe \
>              prack }, \
>    max_uri_len 512, \
>    max_call_id_len 80, \
>    max_requestName_len 20, \
>    max_from_len 256, \
>    max_to_len 256, \
>    max_via_len 1024, \
>    max_contact_len 512, \
>    max_content_len 2048
>
> # IMAP preprocessor.  For more information see README.imap
> preprocessor imap: \
>    ports { 143 } \
>    b64_decode_depth 0 \
>    qp_decode_depth 0 \
>    bitenc_decode_depth 0 \
>    uu_decode_depth 0
>
> # POP preprocessor. For more information see README.pop
> preprocessor pop: \
>    ports { 110 } \
>    b64_decode_depth 0 \
>    qp_decode_depth 0 \
>    bitenc_decode_depth 0 \
>    uu_decode_depth 0
>
> # Modbus preprocessor. For more information see README.modbus
> preprocessor modbus: ports { 502 }
>
> # DNP3 preprocessor. For more information see README.dnp3
> preprocessor dnp3: ports { 20000 } \
>    memcap 262144 \
>    check_crc
>
> #
> # Note to Debian users: this is disabled since it is an experimental
> # preprocessor. If you want to use it you have to create the rules files
> # referenced below in the /etc/snort/rules directory
> #
> # Reputation preprocessor. For more information see README.reputation
> #preprocessor reputation: \
> #   memcap 500, \
> #   priority whitelist, \
> #   nested_ip inner, \
> #   whitelist $WHITE_LIST_PATH/white_list.rules, \
> #   blacklist $BLACK_LIST_PATH/black_list.rules
>
> ###################################################
> # Step #6: Configure output plugins
> # For more information, see Snort Manual, Configuring Snort - Output
> Modules
> ###################################################
>
> #unified2
> #unified2:pcap_and_alert
> # Recommended for most installs
>
> # output unified2: filename merged.log, limit 128, nostamp,
> mpls_event_types, vlan_event_types
> #CHANGED THIS ONE
> output unified2: filename snort.log, limit 128, nostamp, mpls_event_types,
> vlan_event_types
>
> # Additional configuration for specific types of installs
> #output alert_unified2: filename snort.alert, limit 128, nostamp
> # output log_unified2: filename snort.log, limit 128, nostamp
>
> # syslog
> # output alert_syslog: LOG_AUTH LOG_ALERT
>
> # pcap
> # output log_tcpdump: tcpdump.log
>
> # metadata reference data.  do not modify these lines
> include classification.config
> include reference.config
>
>
> ###################################################
> # Step #7: Customize your rule set
> # For more information, see Snort Manual, Writing Snort Rules
> #
> # NOTE: All categories are enabled in this conf file
> ###################################################
>
> # Note to Debian users: The rules preinstalled in the system
> # can be *very* out of date. For more information please read
> # the /usr/share/doc/snort-rules-default/README.Debian file
>
> #
> # If you install the official VRT Sourcefire rules please review this
> # configuration file and re-enable (remove the comment in the first line)
> those
> # rules files that are available in your system (in the /etc/snort/rules
> # directory)
>
> # site specific rules
> include $RULE_PATH/local.rules
>
> #include $RULE_PATH/app-detect.rules
> include $RULE_PATH/attack-responses.rules
> include $RULE_PATH/backdoor.rules
> include $RULE_PATH/bad-traffic.rules
> #include $RULE_PATH/blacklist.rules
> #include $RULE_PATH/botnet-cnc.rules
> #include $RULE_PATH/browser-chrome.rules
> #include $RULE_PATH/browser-firefox.rules
> #include $RULE_PATH/browser-ie.rules
> #include $RULE_PATH/browser-other.rules
> #include $RULE_PATH/browser-plugins.rules
> #include $RULE_PATH/browser-webkit.rules
> include $RULE_PATH/chat.rules
> #include $RULE_PATH/content-replace.rules
> include $RULE_PATH/ddos.rules
> include $RULE_PATH/dns.rules
> include $RULE_PATH/dos.rules
> include $RULE_PATH/experimental.rules
> #include $RULE_PATH/exploit-kit.rules
> include $RULE_PATH/exploit.rules
> #include $RULE_PATH/file-executable.rules
> #include $RULE_PATH/file-flash.rules
> #include $RULE_PATH/file-identify.rules
> #include $RULE_PATH/file-image.rules
> #include $RULE_PATH/file-java.rules
> #include $RULE_PATH/file-multimedia.rules
> #include $RULE_PATH/file-office.rules
> #include $RULE_PATH/file-other.rules
> #include $RULE_PATH/file-pdf.rules
> include $RULE_PATH/finger.rules
> include $RULE_PATH/ftp.rules
> include $RULE_PATH/icmp-info.rules
> include $RULE_PATH/icmp.rules
> include $RULE_PATH/imap.rules
> #include $RULE_PATH/indicator-compromise.rules
> #include $RULE_PATH/indicator-obfuscation.rules
> #include $RULE_PATH/indicator-scan.rules
> #include $RULE_PATH/indicator-shellcode.rules
> include $RULE_PATH/info.rules
> #include $RULE_PATH/malware-backdoor.rules
> #include $RULE_PATH/malware-cnc.rules
> #include $RULE_PATH/malware-other.rules
> #include $RULE_PATH/malware-tools.rules
> include $RULE_PATH/misc.rules
> include $RULE_PATH/multimedia.rules
> include $RULE_PATH/mysql.rules
> include $RULE_PATH/netbios.rules
> include $RULE_PATH/nntp.rules
> include $RULE_PATH/oracle.rules
> #include $RULE_PATH/os-linux.rules
> #include $RULE_PATH/os-mobile.rules
> #include $RULE_PATH/os-other.rules
> #include $RULE_PATH/os-solaris.rules
> #include $RULE_PATH/os-windows.rules
> include $RULE_PATH/other-ids.rules
> include $RULE_PATH/p2p.rules
> #include $RULE_PATH/phishing-spam.rules
> #include $RULE_PATH/policy-multimedia.rules
> #include $RULE_PATH/policy-other.rules
> include $RULE_PATH/policy.rules
> #include $RULE_PATH/policy-social.rules
> #include $RULE_PATH/policy-spam.rules
> include $RULE_PATH/pop2.rules
> include $RULE_PATH/pop3.rules
> #include $RULE_PATH/protocol-dns.rules
> #include $RULE_PATH/protocol-finger.rules
> #include $RULE_PATH/protocol-ftp.rules
> #include $RULE_PATH/protocol-icmp.rules
> #include $RULE_PATH/protocol-imap.rules
> #include $RULE_PATH/protocol-nntp.rules
> #include $RULE_PATH/protocol-pop.rules
> #include $RULE_PATH/protocol-rpc.rules
> #include $RULE_PATH/protocol-scada.rules
> #include $RULE_PATH/protocol-services.rules
> #include $RULE_PATH/protocol-snmp.rules
> #include $RULE_PATH/protocol-telnet.rules
> #include $RULE_PATH/protocol-tftp.rules
> #include $RULE_PATH/protocol-voip.rules
> #include $RULE_PATH/pua-adware.rules
> #include $RULE_PATH/pua-other.rules
> #include $RULE_PATH/pua-p2p.rules
> #include $RULE_PATH/pua-toolbars.rules
> include $RULE_PATH/rpc.rules
> include $RULE_PATH/rservices.rules
> #include $RULE_PATH/scada.rules
> include $RULE_PATH/scan.rules
> #include $RULE_PATH/server-apache.rules
> #include $RULE_PATH/server-iis.rules
> #include $RULE_PATH/server-mail.rules
> #include $RULE_PATH/server-mssql.rules
> #include $RULE_PATH/server-mysql.rules
> #include $RULE_PATH/server-oracle.rules
> #include $RULE_PATH/server-other.rules
> #include $RULE_PATH/server-samba.rules
> #include $RULE_PATH/server-webapp.rules
> #
> # Note: These rules are disable by default as they are
> # too coarse grained. Enabling them causes a large
> # performance impact
> #include $RULE_PATH/shellcode.rules
> include $RULE_PATH/smtp.rules
> include $RULE_PATH/snmp.rules
> #include $RULE_PATH/specific-threats.rules
> #include $RULE_PATH/spyware-put.rules
> include $RULE_PATH/sql.rules
> include $RULE_PATH/telnet.rules
> include $RULE_PATH/tftp.rules
> include $RULE_PATH/virus.rules
> #include $RULE_PATH/voip.rules
> #include $RULE_PATH/web-activex.rules
> include $RULE_PATH/web-attacks.rules
> include $RULE_PATH/web-cgi.rules
> include $RULE_PATH/web-client.rules
> include $RULE_PATH/web-coldfusion.rules
> include $RULE_PATH/web-frontpage.rules
> include $RULE_PATH/web-iis.rules
> include $RULE_PATH/web-misc.rules
> include $RULE_PATH/web-php.rules
> include $RULE_PATH/x11.rules
> include $RULE_PATH/community-sql-injection.rules
> include $RULE_PATH/community-web-client.rules
> include $RULE_PATH/community-web-dos.rules
> include $RULE_PATH/community-web-iis.rules
> include $RULE_PATH/community-web-misc.rules
> include $RULE_PATH/community-web-php.rules
> include $RULE_PATH/community-sql-injection.rules
> include $RULE_PATH/community-web-client.rules
> include $RULE_PATH/community-web-dos.rules
> include $RULE_PATH/community-web-iis.rules
> include $RULE_PATH/community-web-misc.rules
> include $RULE_PATH/community-web-php.rules
>
>
> ###################################################
> # Step #8: Customize your preprocessor and decoder alerts
> # For more information, see README.decoder_preproc_rules
> ###################################################
>
> # decoder and preprocessor event rules
> # include $PREPROC_RULE_PATH/preprocessor.rules
> # include $PREPROC_RULE_PATH/decoder.rules
> # include $PREPROC_RULE_PATH/sensitive-data.rules
>
> ###################################################
> # Step #9: Customize your Shared Object Snort Rules
> # For more information, see
> http://vrt-blog.snort.org/2009/01/using-vrt-certified-shared-object-rules.html
> ###################################################
>
> # dynamic library rules
> # include $SO_RULE_PATH/bad-traffic.rules
> # include $SO_RULE_PATH/chat.rules
> # include $SO_RULE_PATH/dos.rules
> # include $SO_RULE_PATH/exploit.rules
> # include $SO_RULE_PATH/icmp.rules
> # include $SO_RULE_PATH/imap.rules
> # include $SO_RULE_PATH/misc.rules
> # include $SO_RULE_PATH/multimedia.rules
> # include $SO_RULE_PATH/netbios.rules
> # include $SO_RULE_PATH/nntp.rules
> # include $SO_RULE_PATH/p2p.rules
> # include $SO_RULE_PATH/smtp.rules
> # include $SO_RULE_PATH/snmp.rules
> # include $SO_RULE_PATH/specific-threats.rules
> # include $SO_RULE_PATH/web-activex.rules
> # include $SO_RULE_PATH/web-client.rules
> # include $SO_RULE_PATH/web-iis.rules
> # include $SO_RULE_PATH/web-misc.rules
>
> # Event thresholding or suppression commands. See threshold.conf
> include threshold.conf
> include $RULE_PATH/snort.rules
>
>
>
> And barnyard2 looks like this
>
>
>
> #
> #  Barnyard2 example configuration file
> #
>
> #
> # This file contains a sample barnyard2 configuration.
> # You can take the following steps to create your own custom configuration:
> #
> #   1) Configure the variable declarations
> #   2) Setup the input plugins
> #   3) Setup the output plugins
> #
>
> #
> # Step 1: configure the variable declarations
> #
>
> # in order to keep from having a commandline that uses every letter in the
> # alphabet most configuration options are set here.
>
> # use UTC for timestamps
> #
> #config utc
>
> # set the appropriate paths to the file(s) your Snort process is using.
> #
> config reference_file:      /etc/snort/reference.config
> config classification_file: /etc/snort/classification.config
> config gen_file:            /etc/snort/gen-msg.map
> config sid_file:            /etc/snort/sid-msg.map
>
>
> # Configure signature suppression at the spooler level see
> doc/README.sig_suppress
> #
> #
> #config sig_suppress: 1:10
>
>
> # Set the event cache size to defined max value before recycling of event
> occur.
> #
> #
> #config event_cache_size: 4096
>
> # define dedicated references similar to that of snort.
> #
> #config reference: mybugs http://www.mybugs.com/?s=
>
> # define explicit classifications similar to that of snort.
> #
> #config classification: shortname, short description, priority
>
> # set the directory for any output logging
> #
> config logdir: /var/log/snort
>
> # to ensure that any plugins requiring some level of uniqueness in their
> output
> # the alert_with_interface_name, interface and hostname directives are
> provided.
> # An example of usage would be to configure them to the values of the
> associated
> # snort process whose unified files you are reading.
> #
> # Example:
> #   For a snort process as follows:
> #     snort -i eth0 -c /etc/snort.conf
> #
> #   Typical options would be:
> #     config hostname:  thor
> #     config interface: eth0
> #     config alert_with_interface_name
> #
> #config hostname:   thor
> config interface:  eth0
>
> # enable printing of the interface name when alerting.
> #
> #config alert_with_interface_name
>
> # at times snort will alert on a packet within a stream and dump that
> stream to
> # the unified output. barnyard2 can generate output on each packet of that
> # stream or the first packet only.
> #
> #config alert_on_each_packet_in_stream
>
> # enable daemon mode
> #
> config daemon
>
> # make barnyard2 process chroot to directory after initialisation.
> #
> #config chroot: /var/spool/barnyard2
>
> # specifiy the group or GID for barnyard2 to run as after initialisation.
> #
> #config set_gid: 999
>
> # specifiy the user or UID for barnyard2 to run as after initialisation.
> #
> #config set_uid: 999
>
> # specify the directory for the barnyard2 PID file.
> #
> #config pidpath: /var/run/by2.pid
>
> # enable decoding of the data link (or second level headers).
> #
> #config decode_data_link
>
> # dump the application data
> #
> #config dump_payload
>
> # dump the application data as chars only
> #
> #config dump_chars_only
>
> # enable verbose dumping of payload information in log style output
> plugins.
> #
> #config dump_payload_verbose
>
> # enable obfuscation of logged IP addresses.
> #
> #config obfuscate
>
> # enable the year being shown in timestamps
> #
> #config show_year
>
> # set the umask for all files created by the barnyard2 process (eg. log
> files).
> #
> #config umask: 066
>
> # enable verbose logging
> #
> #config verbose
>
> # quiet down some of the output
> #
> #config quiet
>
> # define the full waldo filepath.
> #
> #config waldo_file: /var/log/snort
>
> # specificy the maximum length of the MPLS label chain
> #
> #config max_mpls_labelchain_len: 64
>
> # specify the protocol (ie ipv4, ipv6, ethernet) that is encapsulated by
> MPLS.
> #
> #config mpls_payload_type: ipv4
>
> # set the reference network or homenet which is predominantly used by the
> # log_ascii plugin.
> #
> #config reference_net: 192.168.0.0/24 <http://192.168.0.0/24>
>
> #
> # CONTINOUS MODE
> #
>
> # set the archive directory for use with continous mode
> #
> #config archivedir: /tmp
>
> # when in operating in continous mode, only process new records and ignore
> any
> # existing unified files
> #
> #config process_new_records_only
>
>
> #
> # Step 2: setup the input plugins
> #
>
> # this is not hard, only unified2 is supported ;)
>
> input unified2:
>
>
>
>
> #
> # Step 3: setup the output plugins
> #
>
> # alert_cef
> #
> ----------------------------------------------------------------------------
> #
> # Purpose:
> #  This output module provides the abilty to output alert information to a
> # remote network host as well as the local host using the open standard
> # Common Event Format (CEF).
> #
> # Arguments: host=hostname[:port], severity facility
> #            arguments should be comma delimited.
> #   host        - specify a remote hostname or IP with optional port number
> #                 this is only specific to WIN32 (and is not yet fully
> supported)
> #   severity    - as defined in RFC 3164 (eg. LOG_WARN, LOG_INFO)
> #   facility    - as defined in RFC 3164 (eg. LOG_AUTH, LOG_LOCAL0)
> #
> # Examples:
> #   output alert_cef
> #   output alert_cef: host=192.168.10.1
> #   output alert_cef: host=sysserver.com:1001 <http://sysserver.com:1001>
> #   output alert_cef: LOG_AUTH LOG_INFO
> #
>
> # alert_bro
> #
> ----------------------------------------------------------------------------
> #
> # Purpose: Send alerts to a Bro-IDS instance.
> #
> # Arguments: hostname:port
> #
> # Examples:
> #   output alert_bro: 127.0.0.1:47757 <http://127.0.0.1:47757>
>
> # alert_fast
> #
> ----------------------------------------------------------------------------
> # Purpose: Converts data to an approximation of Snort's "fast alert" mode.
> #
> # Arguments: file <file>, stdout
> #            arguments should be comma delimited.
> #   file - specifiy alert file
> #   stdout - no alert file, just print to screen
> #
> # Examples:
> #   output alert_fast
> #   output alert_fast: stdout
> #
> output alert_fast
>
>
> # prelude: log to the Prelude Hybrid IDS system
> #
> ----------------------------------------------------------------------------
> #
> # Purpose:
> #  This output module provides logging to the Prelude Hybrid IDS system
> #
> # Arguments: profile=snort-profile
> #   snort-profile   - name of the Prelude profile to use (default is
> snort).
> #
> # Snort priority to IDMEF severity mappings:
> # high < medium < low < info
> #
> # These are the default mapped from classification.config:
> # info   = 4
> # low    = 3
> # medium = 2
> # high   = anything below medium
> #
> # Examples:
> #   output alert_prelude
> #   output alert_prelude: profile=snort-profile-name
> #
>
>
> # alert_syslog
> #
> ----------------------------------------------------------------------------
> #
> # Purpose:
> #  This output module provides the abilty to output alert information to
> local syslog
> #
> #   severity    - as defined in RFC 3164 (eg. LOG_WARN, LOG_INFO)
> #   facility    - as defined in RFC 3164 (eg. LOG_AUTH, LOG_LOCAL0)
> #
> # Examples:
> #   output alert_syslog
> #   output alert_syslog: LOG_AUTH LOG_INFO
> #
>
> # syslog_full
> #-------------------------------
> # Available as both a log and alert output plugin.  Used to output data
> via TCP/UDP or LOCAL ie(syslog())
> # Arguments:
> #      sensor_name $sensor_name         - unique sensor name
> #      server $server                   - server the device will report to
> #      local                            - if defined, ignore all remote
> information and use syslog() to send message.
> #      protocol $protocol               - protocol device will report over
> (tcp/udp)
> #      port $port                       - destination port device will
> report to (default: 514)
> #      delimiters $delimiters           - define a character that will
> delimit message sections ex:  "|", will use | as message section
> delimiters. (default: |)
> #      separators $separators           - define field separator included
> in each message ex: " " ,  will use space as field separator.
>  (default: [:space:])
> #      operation_mode $operaion_mode    - default | complete : default
> mode is compatible with default snort syslog message, complete prints more
> information such as the raw packet (hexed)
> #      log_priority   $log_priority     - used by local option for syslog
> priority call. (man syslog(3) for supported options) (default: LOG_INFO)
> #      log_facility  $log_facility      - used by local option for syslog
> facility call. (man syslog(3) for supported options) (default: LOG_USER)
> #      payload_encoding                 - (default: hex)  support
> hex/ascii/base64 for log_syslog_full using operation_mode complete only.
>
> # Usage Examples:
> # output alert_syslog_full: sensor_name snortIds1-eth2, server
> xxx.xxx.xxx.xxx, protocol udp, port 514, operation_mode default
> # output alert_syslog_full: sensor_name snortIds1-eth2, server
> xxx.xxx.xxx.xxx, protocol udp, port 514, operation_mode complete
> # output log_syslog_full: sensor_name snortIds1-eth2, server
> xxx.xxx.xxx.xxx, protocol udp, port 514, operation_mode default
> # output log_syslog_full: sensor_name snortIds1-eth2, server
> xxx.xxx.xxx.xxx, protocol udp, port 514, operation_mode complete
> # output alert_syslog_full: sensor_name snortIds1-eth2, server
> xxx.xxx.xxx.xxx, protocol udp, port 514
> # output log_syslog_full: sensor_name snortIds1-eth2, server
> xxx.xxx.xxx.xxx, protocol udp, port 514
> # output alert_syslog_full: sensor_name snortIds1-eth2, local
> # output log_syslog_full: sensor_name snortIds1-eth2, local, log_priority
> LOG_CRIT,log_facility LOG_CRON
>
> # log_ascii
> #
> ----------------------------------------------------------------------------
> #
> # Purpose: This output module provides the default packet logging
> funtionality
> #
> # Arguments: None.
> #
> # Examples:
> #   output log_ascii
> #
>
>
> # log_tcpdump
> #
> ----------------------------------------------------------------------------
> #
> # Purpose
> #  This output module logs packets in binary tcpdump format
> #
> # Arguments:
> #   The only argument is the output file name.
> #
> # Examples:
> #   output log_tcpdump: tcpdump.log
> #
>
>
> # sguil
> #
> ----------------------------------------------------------------------------
> #
> # Purpose: This output module provides logging ability for the sguil
> interface
> # See doc/README.sguil
> #
> # Arguments: agent_port <port>, sensor_name <name>
> #            arguments should be comma delimited.
> #   agent_port  - explicitly set the sguil agent listening port
> #                 (default: 7736)
> #   sensor_name - explicitly set the sensor name
> #                 (default: machine hostname)
> #
> # Examples:
> #   output sguil
> #   output sguil: agent_port=7000
> #   output sguil: sensor_name=argyle
> #   output sguil: agent_port=7000, sensor_name=argyle
> #
>
>
> # database: log to a variety of databases
> #
> ----------------------------------------------------------------------------
> #
> # Purpose: This output module provides logging ability to a variety of
> databases
> # See doc/README.database for additional information.
> #
> # Examples:
>    output database: log, mysql, user=uniquename password=thepassword
> dbname=databasenamehere host=localhost
> #   output database: log, mysql, user=root password=test dbname=db
> host=localhost
> #   output database: alert, postgresql, user=snort dbname=snort
> #   output database: log, odbc, user=snort dbname=snort
> #   output database: log, mssql, dbname=snort user=snort password=test
> #   output database: log, oracle, dbname=snort user=snort password=test
> #
>
>
> # alert_fwsam: allow blocking of IP's through remote services
> #
> ----------------------------------------------------------------------------
> # output alert_fwsam: <SnortSam Station>:<port>/<key>
> #
> #  <FW Mgmt Station>:  IP address or host name of the host running
> SnortSam.
> #  <port>:         Port the remote SnortSam service listens on (default
> 898).
> #  <key>:              Key used for authentication (encryption really)
> #              of the communication to the remote service.
> #
> # Examples:
> #
> # output alert_fwsam: snortsambox/idspassword
> # output alert_fwsam: fw1.domain.tld:898/mykey
> # output alert_fwsam: 192.168.0.1/borderfw <http://192.168.0.1/borderfw>
>  192.168.1.254/wanfw <http://192.168.1.254/wanfw>
> #
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
>
> ------------------------------
>
>
> ------------------------------------------------------------------------------
> Dive into the World of Parallel Programming The Go Parallel Website,
> sponsored
> by Intel and developed in partnership with Slashdot Media, is your hub for
> all
> things parallel software development, from weekly thought leadership blogs
> to
> news, videos, case studies, tutorials and more. Take a look and join the
> conversation now. http://goparallel.sourceforge.net/
>
> ------------------------------
>
> _______________________________________________
> Snort-users mailing list
> Snort-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/snort-users
>
>
> End of Snort-users Digest, Vol 106, Issue 43
> ********************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.snort.org/pipermail/snort-users/attachments/20150318/627beb54/attachment.html>


More information about the Snort-users mailing list