[Snort-users] Snort spikes to 100% CPU followed by network latency
cbrugh at ...11827...
Wed May 28 17:40:39 EDT 2014
Also note that when we see these CPU/latency spikes we have no alerts or drops that would easily tell us what is causing the problem. If it's not a rule what should I start turning off to try eliminate possible causes? It's something that doesn't log or anything.
> On May 28, 2014, at 5:12 PM, "Russ Combs (rucombs)" <rucombs at ...589...> wrote:
> From: Cody Brugh [cbrugh at ...11827...]
> Sent: Tuesday, May 27, 2014 6:30 PM
> To: Russ Combs (rucombs)
> Cc: snort-users at lists.sourceforge.net
> Subject: Re: [Snort-users] Snort spikes to 100% CPU followed by network latency
> I am still having latency/CPU spike issues even after enabling PPM configuration.... In the below logs where does it tell me which rule SIG ID so I can disable the rules that are causing me slowness?
> * Actually, it doesn't tell you which rule. Only which rule tree, which isn't terribly helpful. That's because the rules are compiled into a different form to eliminate redundant checks.
> It does tell you that the rule trees that are triggering the PPM events are around 55 usec although you have one shown which is higher. What is your threshold set to?
> Also, did you analyze the packets logged with the events to see what type of traffic this is? You may be able to narrow it down and capture a whole session that triggers the problem and go from there.
> PPM: Rule-Event Pkt address=0x0x8200f80 re-enabled 05/27-18:26:27.989936
> PPM: Rule-Event Pkt suspended (18.104.22.168:53484 -> 10.2.14.21:80).
> PPM: Rule-Event Pkt address=0x0x8200f80 used=52.7766 usecs suspended 05/27-18:26:27.989936
> PPM: Rule-Event Pkt address=0x0x3c28fb0 re-enabled 05/27-18:26:36.195293
> PPM: Rule-Event Pkt suspended (10.2.13.17:80 -> 22.214.171.124:41204).
> PPM: Rule-Event Pkt address=0x0x3c28fb0 used=54.8616 usecs suspended 05/27-18:26:40.813898
> PPM: Rule-Event Pkt address=0x0x8200f80 re-enabled 05/27-18:26:48.038002
> PPM: Rule-Event Pkt suspended (126.96.36.199:4163 -> 10.2.2.4:80).
> PPM: Rule-Event Pkt address=0x0x8200f80 used=53.992 usecs suspended 05/27-18:26:49.081371
> PPM: Rule-Event Pkt address=0x0x3c28fb0 re-enabled 05/27-18:27:00.867186
> PPM: Rule-Event Pkt suspended (10.2.13.48:80 -> 188.8.131.52:1046).
> PPM: Rule-Event Pkt address=0x0x3c28fb0 used=54.4075 usecs suspended 05/27-18:27:08.522285
> PPM: Rule-Event Pkt address=0x0x8200f80 re-enabled 05/27-18:27:09.766234
> PPM: Rule-Event Pkt suspended (10.2.13.1:35718 -> 184.108.40.206:80).
> PPM: Rule-Event Pkt address=0x0x8200f80 used=76.2302 usecs suspended 05/27-18:27:15.130825
> PPM: Rule-Event Pkt suspended (220.127.116.11:64983 -> 10.2.13.17:80).
> PPM: Rule-Event Pkt address=0x0x820c0b0 used=53.126 usecs suspended 05/27-18:27:17.180899
>> On Fri, May 23, 2014 at 8:09 AM, Russ Combs (rucombs) <rucombs at ...589...> wrote:
>> From: Cody Brugh [cbrugh at ...11827...]
>> Sent: Thursday, May 22, 2014 8:13 PM
>> To: snort-users at lists.sourceforge.net
>> Subject: [Snort-users] Snort spikes to 100% CPU followed by network latency
>> We have been running snort in-line for over a year now with no issues in terms of latency or CPU usage. Recently (over the past month) snort will all of the sudden spike CPU usage up to 100% and network latency becomes real bad, 1000+ms.
>> I am really not sure where to start on figuring out what is causing this. I am starting snort so it prints the alerts/drops on the console and don't see any specific rule that would be causing this.
>> Any advise on this issue?
>> * Did you change your Snort version or configuration around the time you started seeing the issue? How frequently does this occur? And when it happens does it resolve itself or do you restart or what?
>> You can turn on PPM (config ppm ...) and enable the PPM rules (gid 134). That may catch the problem packet which you can log and examine for clues.
>> Without any clues I'd first check for SDF and PCRE. If you have SDF (preprocessor sensitive_data) configured you can try commenting that out. If you have any pcre/O rules (PCRE override) you can try commenting those out too.
>> Snort OS: CentOS, 64-bit
>> o" )~ Version 18.104.22.168 GRE (Build 56)
>> '''' By Martin Roesch & The Snort Team: http://www.snort.org/snort/snort-team
>> Copyright (C) 2014 Cisco and/or its affiliates. All rights reserved.
>> Copyright (C) 1998-2013 Sourcefire, Inc., et al.
>> Using libpcap version 1.0.0
>> Using PCRE version: 7.8 2008-09-05
>> Using ZLIB version: 1.2.3
>> DAQ version: 2.0.2
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Snort-users