[Snort-users] Command to try out

En Ming Teo teo.en.ming at ...11827...
Fri Apr 4 15:00:03 EDT 2014


root at ...16768...:~# cd /jffs
root at ...16768...:/jffs# ipkg update
mkdir: can't create directory '//usr/local/lib/': Read-only file system
root at ...16768...:/jffs# mkdir -p /jffs/tmp/ipkg
mkdir: can't create directory '/jffs/tmp/': Read-only file system

Teo En Ming


On Sat, Apr 5, 2014 at 2:51 AM, En Ming Teo <teo.en.ming at ...11827...> wrote:

> Dear Bill,
>
> root at ...16768...:~# ipkg list
> ERROR: File not found: //usr/local/lib/ipkg/lists/whiterussian
>        You probably want to run `ipkg update'
> ERROR: File not found: //usr/local/lib/ipkg/lists/non-free
>        You probably want to run `ipkg update'
> ERROR: File not found: //usr/local/lib/ipkg/lists/backports
>        You probably want to run `ipkg update'
> ls: /jffs/tmp/ipkg: No such file or directory
>
>
> Teo En Ming
>
>
>
>
> On Sat, Apr 5, 2014 at 2:35 AM, Bill Parker <wp02855 at ...11827...> wrote:
>
>> That means the module necessary for routing traffic via the -TEE option
>> is not present in the firmware.  At this point, I'd suggest changing the
>> firmware to OpenWRT as it does provide for mirroring.
>>
>> The router you have is supported by OpenWRT, but if you are NOT
>> comfortable replacing DD-WRT for OpenWRT, I would see if there is a local
>> computer group which can assist you.
>>
>> Could you try the command:
>>
>> ipkg list
>>
>> to see which packages are installed in your router:
>>
>> Also, check this wiki out:
>>
>> http://www.dd-wrt.com/wiki/index.php/Ipkg#Installing_ipkg_Packages
>>
>> This shows you how to add missing packages to your router, including the
>> ipt_ROUTE module.
>>
>> Bill
>>
>>
>> On Fri, Apr 4, 2014 at 11:28 AM, En Ming Teo <teo.en.ming at ...11827...>wrote:
>>
>>> Dear Bill,
>>>
>>> root at ...16768...:~# insmod ipt_ROUTE
>>> insmod: ipt_ROUTE.ko: module not found
>>>
>>> Teo En Ming
>>>
>>>
>>>
>>>
>>> On Sat, Apr 5, 2014 at 2:11 AM, Bill Parker <wp02855 at ...11827...> wrote:
>>>
>>>> You might be able to get mirroring working on your router by doing this
>>>> command:
>>>>
>>>>
>>>>
>>>> *insmod ipt_ROUTE*
>>>>
>>>>
>>>> *at the command prompt*
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> *then run 'lsmod' to see which modules are loaded. If the firmware has
>>>> the ipt_route module, it should allow the iptables commands you posted to
>>>> work and mirror traffic on your buffalo router.Bill*
>>>>
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.snort.org/pipermail/snort-users/attachments/20140405/fedba009/attachment.html>


More information about the Snort-users mailing list