[Snort-users] Assistance with Blacklist
Hannibal S. Jackson
hannibaljackson at ...131...
Tue Apr 9 15:57:40 EDT 2013
I didn't try to verify yet b/c I can't get snort to run properly, it exists when it's starting up because it's having an issue with that line in the black_list.rules file. If I comment that white and black lists out in the snort.conf, snort starts just fine.
From: waldo kitty <wkitty42 at ...14940...>
To: Hannibal S. Jackson <hannibaljackson at ...131...>; "snort-users at ...974...rceforge.net" <snort-users at lists.sourceforge.net>
Sent: Tuesday, April 9, 2013 2:31 PM
Subject: Re: [Snort-users] Assistance with Blacklist
On 4/9/2013 12:59, Hannibal S. Jackson wrote:
> So you have to use a CIDR notation?
i don't know... your post used an invalid CIDR notation so i took an eWAG and figured that you were wanting to block the entire network that that IP belongs to... a quick lookup showed that it belongs to facebook so i continued with the eWAG and guessed that the entire network was what you were wanting to block... you can't start a CIDR entry in the middle of the netblock, TTBOMK... you have to list it with the network's address... 184.108.40.206 in this case...
> It's for a class and he just wanted to see
> if we could get it working. Obviously facebook has a bunch of IP's; however, I
> tried to put just the IP in the file without the CIDR mask and it didn't work.
what didn't work? accessing that IP? how did you try to verify it? did you try going to facebook and you were successful? this may be problematic because the browser may have had the page cached and pulled it from there OR the DNS may have given you another IP for facebook...
> The examples I found online showed some with it and some without it. I tired /0
> /8 /16 and then gave up. Thanks, I'll try that when I get back to my machine.
start here -> http://s3.amazonaws.com/snort-org/www/assets/166/snort_manual.pdf
section 2.2.19 Reputation Processor (pg. 118) then croll down to the bottom of page 119 and the top of page 120 for working examples... the default.whitelist example does show plain IPs without any type of mask...
barring that, i've offered what i know and dug up from the docs ;)
> *From:* waldo kitty <wkitty42 at ...14940...>
> *To:* snort-users at lists.sourceforge.net
> *Sent:* Tuesday, April 9, 2013 12:44 PM
> *Subject:* Re: [Snort-users] Assistance with Blacklist
> On 4/9/2013 10:30, Hannibal S. Jackson wrote:
> > I'm getting ERROR: c:\snort\rules\black_list.rules (4) Invalid configuration
> > line: 220.127.116.11
> > The only thing I have in my black_list.rules file is this:
> > # This is my black_list.rules file for www.facebook.com
> > 18.104.22.168/0
> this is not a valid network address or CIDR mask... the address is a
> workstation/server address, though... you need to use a proper network address
> and CIDR mask...
> in this case, the facebook network range is 22.214.171.124 - 126.96.36.199 so the
> proper mask would be 188.8.131.52/18
> IP Address : 184.108.40.206
> Address Class : Classless /18
> Network Address : 220.127.116.11
> Subnet Address : 18.104.22.168
> Subnet Mask : 255.255.192.0
> Subnet bit mask : nnnnnnnn.nnnnnnnn.nnhhhhhh.hhhhhhhh
> Subnet Bits : 18
> Host Bits : 14
> Number of Subnets : 1
> Hosts per Subnet : 16382
> Subnet : 22.214.171.124
> Mask : 255.255.192.0
> Subnet Size : 16382 Hosts
> Host Range : 126.96.36.199 to 188.8.131.52
> Broadcast : 184.108.40.206
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Snort-users