[Snort-users] Nothing Logged into mysql

Esler, Joel Contractor EslerJ at ...8772...
Sat Jun 14 09:34:07 EDT 2003


Your output database line "looks" commented out....

# database: log to a variety of databases
# ---------------------------------------
# See the README.database file for more information about configuring # and
using this plugin. # output database: log, mysql, user=snortman
password=snortman dbname=snort 
host=127.0.0.1 sensor_name=sensor01

However, I do see the log logging in...


What does it say in you <hostname>.err file in mysql?

-----Original Message-----
From: Rohit [mailto:rohitvis at ...5839...] 
Sent: Saturday, June 14, 2003 7:09 AM
To: snort-users at lists.sourceforge.net
Subject: [Snort-users] Nothing Logged into mysql


Hi, 
I installed snort acid and mysql  and everything looks like its running fine

with no apparent errors. But nothing is getting logged into mysql at all. 
Please Help
Here is the command I'm using. I am attaching my output and also the 
snort.conf file
	snort -c /usr/local/etc/snort.conf -i rl0 -u snortman -g wheel


su-2.05b# snort -c /usr/local/etc/snort.conf -i rl0 -u snortman -g wheel
Initializing Output Plugins! Log directory = /var/log/snort

Initializing Network Interface rl0

        --== Initializing Snort ==--
Decoding Ethernet on interface rl0
Initializing Preprocessors!
Initializing Plug-ins!
Parsing Rules file /usr/local/etc/snort.conf

+++++++++++++++++++++++++++++++++++++++++++++++++++
Initializing rule chains...
No arguments to frag2 directive, setting defaults to:
    Fragment timeout: 60 seconds
    Fragment memory cap: 4194304 bytes
    Fragment min_ttl:   0
    Fragment ttl_limit: 5
    Fragment Problems: 0
Stream4 config:
    Stateful inspection: ACTIVE
    Session statistics: INACTIVE
    Session timeout: 30 seconds
    Session memory cap: 8388608 bytes
    State alerts: INACTIVE
    Evasion alerts: INACTIVE
    Scan alerts: ACTIVE
    Log Flushed Streams: INACTIVE
    MinTTL: 1
    TTL Limit: 5
    Async Link: 0
No arguments to stream4_reassemble, setting defaults:
     Reassemble client: ACTIVE
     Reassemble server: INACTIVE
     Reassemble ports: 21 23 25 53 80 143 110 111 513
     Reassembly alerts: ACTIVE
     Reassembly method: FAVOR_OLD
http_decode arguments:
    Unicode decoding
    IIS alternate Unicode decoding
    IIS double encoding vuln
    Flip backslash to slash
    Include additional whitespace separators
    Ports to decode http on: 80
rpc_decode arguments:
    Ports to decode RPC on: 111 32771
telnet_decode arguments:
    Ports to decode telnet on: 21 23 25 119
Using LOCAL time
Conversation Config:
   KeepStats: 0
   Conv Count: 32000
   Timeout   : 60
   Alert Odd?: 0
   Allowed IP Protocols:  All

Portscan2 config:
    log: /var/log/snort/scan.log
    scanners_max: 3200
    targets_max: 5000
    target_limit: 5
    port_limit: 20
    timeout: 60
database: compiled support for ( mysql )
database: configured to use mysql
database:          user = snortman
database: password is set
database: database name = snort
database:          host = 127.0.0.1
database:   sensor name = sensor01
database:     sensor id = 1
database: schema version = 106
database: using the "log" facility
1273 Snort rules read...
1273 Option Chains linked into 133 Chain Headers
0 Dynamic rules
+++++++++++++++++++++++++++++++++++++++++++++++++++

Rule application order: ->activation->dynamic->alert->pass->log

        --== Initialization Complete ==--

-*> Snort! <*-
Version 1.9.0 (Build 209)
By Martin Roesch (roesch at ...1935..., www.snort.org)


Here is my snort.conf 
 
#--------------------------------------------------
#   http://www.snort.org     Snort 1.9.0 Ruleset
#     Contact: snort-sigs at lists.sourceforge.net
#--------------------------------------------------
# NOTE:This ruleset only works for 1.9.0 and later
#--------------------------------------------------
# $Id: snort.conf,v 1.110 2002/08/14 03:17:58 chrisgreen Exp $ #
###################################################
# This file contains a sample snort configuration. 
# You can take the following steps to create your 
# own custom configuration:
#
#  1) Set the network variables for your network
#  2) Configure preprocessors
#  3) Configure output plugins
#  4) Customize your rule set
#
###################################################
# Step #1: Set the network variables:
#
# You must change the following variables to reflect
# your local network. The variable is currently 
# setup for an RFC 1918 address space.
#
# You can specify it explicitly as: 
#
# var HOME_NET 10.1.1.0/24
#
# or use global variable $<interfacename>_ADDRESS 
# which will be always initialized to IP address and 
# netmask of the network interface which you run
# snort at.
#
# var HOME_NET $eth0_ADDRESS
#
# You can specify lists of IP addresses for HOME_NET
# by separating the IPs with commas like this:
#
# var HOME_NET [10.1.1.0/24,192.168.1.0/24]
#
# MAKE SURE YOU DON'T PLACE ANY SPACES IN YOUR LIST!
#
# or you can specify the variable to be any IP address
# like this:

var HOME_NET any

# Set up the external network addresses as well.  
# A good start may be "any"

var EXTERNAL_NET any

# Configure your server lists.  This allows snort to only look for attacks #
to systems that have a service up.  Why look for HTTP attacks if you are #
not running a web server?  This allows quick filtering based on IP addresses
# These configurations MUST follow the same configuration scheme as defined
# above for $HOME_NET.  

# List of DNS servers on your network 
var DNS_SERVERS $HOME_NET

# List of SMTP servers on your network
var SMTP_SERVERS $HOME_NET

# List of web servers on your network
var HTTP_SERVERS $HOME_NET

# List of sql servers on your network 
var SQL_SERVERS $HOME_NET

# List of telnet servers on your network
var TELNET_SERVERS $HOME_NET

# Configure your service ports.  This allows snort to look for attacks 
# destined to a specific application only on the ports that application #
runs on.  For example, if you run a web server on port 8081, set your #
HTTP_PORTS variable like this: # # var HTTP_PORTS 8081 # # Port lists must
either be continuous [eg 80:8080], or a single port [eg 80]. # We will
adding support for a real list of ports in the future.

# Ports you run web servers on
var HTTP_PORTS 80

# Ports you want to look for SHELLCODE on.
var SHELLCODE_PORTS !80

# Ports you do oracle attacks on
var ORACLE_PORTS 1521

# other variables
# 
# AIM servers.  AOL has a habit of adding new AIM servers, so instead of 
# modifying the signatures when they do, we add them to this list of 
# servers.
var AIM_SERVERS 
[64.12.24.0/24,64.12.25.0/24,64.12.26.14/24,64.12.28.0/24,64.12.29.0/24,64.1
2.161.0/24,64.12.163.0/24,205.188.5.0/24,205.188.9.0/24]

# Path to your rules files (this can be a relative path)
var RULE_PATH ../share/snort

###################################################
# Step #2: Configure preprocessors
#
# General configuration for preprocessors is of 
# the form
# preprocessor <name_of_processor>: <configuration_options>

# frag2: IP defragmentation support
# -------------------------------
# This preprocessor performs IP defragmentation.  This plugin will also
detect # people launching fragmentation attacks (usually DoS) against hosts.
No # arguments loads the default configuration of the preprocessor, which is
a 
# 60 second timeout and a 4MB fragment buffer. 

# The following (comma delimited) options are available for frag2
#    timeout [seconds] - sets the number of [seconds] than an unfinished 
#                        fragment will be kept around waiting for
completion,
#                        if this time expires the fragment will be flushed
#    memcap [bytes] - limit frag2 memory usage to [number] bytes
#                      (default:  4194304)
#
#    min_ttl [number] - minimum ttl to accept
# 
#    ttl_limit [number] - difference of ttl to accept without alerting
#                         will cause false positves with router flap
# 
# Frag2 uses Generator ID 113 and uses the following SIDS 
# for that GID:
#  SID     Event description
# -----   -------------------
#   1       Oversized fragment (reassembled frag > 64k bytes)
#   2       Teardrop-type attack

preprocessor frag2

# stream4: stateful inspection/stream reassembly for Snort
#----------------------------------------------------------------------
# Use in concert with the -z [all|est] command line switch to defeat 
# stick/snot against TCP rules.  Also performs full TCP stream 
# reassembly, stateful inspection of TCP streams, etc.  Can statefully #
detect various portscan types, fingerprinting, ECN, etc.

# stateful inspection directive
# no arguments loads the defaults (timeout 30, memcap 8388608) # options
(options are comma delimited):
#   detect_scans - stream4 will detect stealth portscans and generate alerts
#                  when it sees them when this option is set
#   detect_state_problems - detect TCP state problems, this tends to be very
#                           noisy because there are a lot of crappy ip stack
#                           implementations out there
#
#   disable_evasion_alerts - turn off the possibly noisy mitigation of
#                            overlapping sequences.
#
#
#   min_ttl [number]       - set a minium ttl that snort will accept to
#                            stream reassembly
#
#   ttl_limit [number]     - differential of the initial ttl on a session 
versus
#                             the normal that someone may be playing games.
#                             Routing flap may cause lots of false
positives.
# 
#   keepstats [machine|binary] - keep session statistics, add "machine" to 
#                         get them in a flat format for machine reading, add
#                         "binary" to get them in a unified binary output 
#                         format
#   noinspect - turn off stateful inspection only
#   timeout [number] - set the session timeout counter to [number] seconds,
#                      default is 30 seconds
#   memcap [number] - limit stream4 memory usage to [number] bytes
#   log_flushed_streams - if an event is detected on a stream this option
will
#                         cause all packets that are stored in the stream4
#                         packet buffers to be flushed to disk.  This only 
#                         works when logging in pcap mode!
#
# Stream4 uses Generator ID 111 and uses the following SIDS 
# for that GID:
#  SID     Event description
# -----   -------------------
#   1       Stealth activity
#   2       Evasive RST packet
#   3       Evasive TCP packet retransmission
#   4       TCP Window violation
#   5       Data on SYN packet
#   6       Stealth scan: full XMAS
#   7       Stealth scan: SYN-ACK-PSH-URG
#   8       Stealth scan: FIN scan
#   9       Stealth scan: NULL scan
#   10      Stealth scan: NMAP XMAS scan
#   11      Stealth scan: Vecna scan
#   12      Stealth scan: NMAP fingerprint scan stateful detect
#   13      Stealth scan: SYN-FIN scan
#   14      TCP forward overlap

preprocessor stream4: detect_scans, disable_evasion_alerts

# tcp stream reassembly directive
# no arguments loads the default configuration 
#   Only reassemble the client,
#   Only reassemble the default list of ports (See below),  
#   Give alerts for "bad" streams
#
# Available options (comma delimited):
#   clientonly - reassemble traffic for the client side of a connection only
#   serveronly - reassemble traffic for the server side of a connection only
#   both - reassemble both sides of a session
#   noalerts - turn off alerts from the stream reassembly stage of stream4
#   ports [list] - use the space separated list of ports in [list], "all" 
#                  will turn on reassembly for all ports, "default" will
turn
#                  on reassembly for ports 21, 23, 25, 53, 80, 143, 110, 111
#                  and 513

preprocessor stream4_reassemble

# http_decode: normalize HTTP requests
# ------------------------------------
# http_decode normalizes HTTP requests from remote 
# machines by converting any %XX character 
# substitutions to their ASCII equivalent. This is
# very useful for doing things like defeating hostile
# attackers trying to stealth themselves from IDSs by
# mixing these substitutions in with the request. 
# Specify the port numbers you want it to analyze as arguments. # # Major
code cleanups thanks to rfp #
# unicode          - normalize unicode
# iis_alt_unicode  - %u encoding from iis 
# double_encode    - alert on possible double encodings
# iis_flip_slash   - normalize \ as /
# full_whitespace  - treat \t as whitespace ( for apache )
#
# for that GID:
#  SID     Event description
# -----   -------------------
#   1       UNICODE attack
#   2       NULL byte attack

preprocessor http_decode: 80 unicode iis_alt_unicode double_encode 
iis_flip_slash full_whitespace

# rpc_decode: normalize RPC traffic
# ---------------------------------
# RPC may be sent in alternate encodings besides the usual
# 4-byte encoding that is used by default.  This preprocessor
# normalized RPC traffic in much the same way as the http_decode #
preprocessor.  This plugin takes the ports numbers that RPC 
# services are running on as arguments.
# The RPC decode preprocessor uses generator ID 106 and does not # generate
any SIDs at this time.

preprocessor rpc_decode: 111 32771

# bo: Back Orifice detector
# -------------------------
# Detects Back Orifice traffic on the network.  This preprocessor # uses the
Back Orifice "encryption" algorithm to search for 
# traffic conforming to the Back Orifice protocol (not BO2K).
# This preprocessor can take two arguments.  The first is "-nobrute" # which
turns off the plugin's brute forcing routine (brute forces 
# the key space of the protocol to find BO traffic).  The second # argument
that can be passed to the routine is a number to use # as the default key
when trying to decrypt the traffic.  The 
# default value is 31337 (just like BO).  Be aware that turning on # the
brute forcing option runs the risk of impacting the overall # performance of
Snort, you've been warned... # 
# The Back Orifice detector uses Generator ID 105 and uses the 
# following SIDS for that GID:
#  SID     Event description
# -----   -------------------
#   1       Back Orifice traffic detected

preprocessor bo: -nobrute

# telnet_decode: Telnet negotiation string normalizer
# ---------------------------------------------------
# This preprocessor "normalizes" telnet negotiation strings from # telnet
and ftp traffic.  It works in much the same way as the 
# http_decode preprocessor, searching for traffic that breaks up # the
normal data stream of a protocol and replacing it with 
# a normalized representation of that traffic so that the "content" #
pattern matching keyword can work without requiring modifications. # This
preprocessor requires no arguments. # Portscan uses Generator ID 109 and
does not generate any SID currently.

preprocessor telnet_decode

# Portscan: detect a variety of portscans
# ---------------------------------------
# portscan preprocessor by Patrick Mullen <p_mullen at ...245...> # This
preprocessor detects UDP packets or TCP SYN packets going to # four
different ports in less than three seconds. "Stealth" TCP # packets are
always detected, regardless of these settings. # Portscan uses Generator ID
100 and uses the following SIDS for that GID:
#  SID     Event description
# -----   -------------------
#   1       Portscan detect
#   2       Inter-scan info
#   3       Portscan End

 preprocessor portscan: $HOME_NET 4 3 portscan.log

# Use portscan-ignorehosts to ignore TCP SYN and UDP "scans" from # specific
networks or hosts to reduce false alerts. It is typical # to see many false
alerts from DNS servers so you may want to # add your DNS servers here. You
can all multiple hosts/networks # in a whitespace-delimited list. #
#preprocessor portscan-ignorehosts: 0.0.0.0

# arpspoof
#----------------------------------------
# Experimental ARP detection code from Jeff Nathan, detects ARP attacks, 
# unicast ARP requests, and specific ARP mapping monitoring.  To make use #
of this preprocessor you must specify the IP and hardware address of hosts 
on # the same layer 2 segment as you.  Specify one host IP MAC combo per 
line.
# Also takes a "-unicast" option to turn on unicast ARP request detection. 
# Arpspoof uses Generator ID 112 and uses the following SIDS for that GID:
#  SID     Event description
# -----   -------------------
#   1       Unicast ARP request
#   2       Etherframe ARP mismatch (src)
#   3       Etherframe ARP mismatch (dst)
#   4       ARP cache overwrite attack

#preprocessor arpspoof
#preprocessor arpspoof_detect_host: 192.168.40.1 f0:0f:00:f0:0f:00

# ASN1 Decode
#-----------------------------------------
# This is an experimental preprocessor.  ASN.1 decoder and analysis plugin 
# from Andrew R. Baker.  This preprocessor will detect abuses of the ASN.1 
# protocol that higher level protocols (like SSL, SNMP, x.509, etc) rely on.
# The ASN.1 decoder uses Generator ID 115 and uses the following SIDs for 
# that GID:
#  SID     Event description
# -----   -------------------
#   1       Indefinite length
#   2       Invalid length
#   3       Oversized item
#   4       ASN.1 specification violation
#   5       Dataum bad length

preprocessor asn1_decode

# Fnord 
#-----------------------------------------
# This is an experimental preprocessor.  Polymorphic shellcode analyzer and
# detector by Dragos Ruiu.  This preprocessor will watch traffic for 
# polymorphic NOP-type sleds to defeat tools like ADMutate.  The Fnord 
detector
# uses Generator ID 114 and the following SIDs:
#  SID     Event description
# -----   -------------------
#   1       NOP-sled detected 

# preprocessor fnord

# Conversation
#------------------------------------------
# This preprocessor tracks conversations for tcp, udp and icmp traffic.  It
# is a prerequisite for running portscan2. # # allowed_ip_protcols 1 6 17
#      list of allowed ip protcols ( defaults to any )
#
# timeout [num]
#      conversation timeout ( defaults to 60 )
#
#
# max_conversations [num] 
#      number of conversations to support at once (defaults to 65335)
#
#
# alert_odd_protocols
#      alert on protocols not listed in allowed_ip_protocols

preprocessor conversation: allowed_ip_protocols all, timeout 60, 
max_conversations 32000

# Portscan2
#-------------------------------------------
# Portscan 2, detect portscans in a new and exciting way.
#
# Available options:
#       scanners_max [num] 
#       targets_max [num]
#       target_limit [num]
#       port_limit [num]
#       timeout [num]
#       log [logdir]

preprocessor portscan2: scanners_max 3200, targets_max 5000, target_limit 5,

port_limit 20, timeout 60

# Experimental Perf stats
# -----------------------
# No docs. Highly subject to change.
# 
# preprocessor perfmonitor: console flow events time 10

####################################################################
# Step #3: Configure output plugins
#
# Uncomment and configure the output plugins you decide to use. # General
configuration for output plugins is of the form: # # output
<name_of_plugin>: <configuration_options> # # alert_syslog: log alerts to
syslog # ----------------------------------
# Use one or more syslog facilities as arguments
#
# output alert_syslog: LOG_AUTH LOG_ALERT

# log_tcpdump: log packets in binary tcpdump format
# -------------------------------------------------
# The only argument is the output file name.
#
# output log_tcpdump: tcpdump.log

# database: log to a variety of databases
# ---------------------------------------
# See the README.database file for more information about configuring # and
using this plugin. # output database: log, mysql, user=snortman
password=snortman dbname=snort 
host=127.0.0.1 sensor_name=sensor01

# output database: log, mysql, user=root password=test dbname=db 
host=localhost
# output database: alert, postgresql, user=snort dbname=snort
# output database: log, unixodbc, user=snort dbname=snort
# output database: log, mssql, dbname=snort user=snort password=test

# xml: xml logging
# ----------------
# See the README.xml file for more information about configuring # and using
this plugin. # # output xml: log, file=/var/log/snortxml

# unified: Snort unified binary format alerting and logging
# -------------------------------------------------------------
# The unified output plugin provides two new formats for logging # and
generating alerts from Snort, the "unified" format.  The # unified format is
a straight binary format for logging data 
# out of Snort that is designed to be fast and efficient.  Used # with
barnyard (the new alert/log processor), most of the overhead # for logging
and alerting to various slow storage mechanisms # such as databases or the
network can now be avoided.  
#
# Check out the spo_unified.h file for the data formats.
#
# Two arguments are supported.
#    filename - base filename to write to (current time_t is appended)
#    limit    - maximum size of spool file in MB (default: 128)
#
# output alert_unified: filename snort.alert, limit 128
# output log_unified: filename snort.log, limit 128

# trap_snmp: SNMP alerting for Snort
# -------------------------------------------------------------
# Read the README.SNMP file for more information on enabling and using this
# plug-in. # #

#The trap_snmp plugin accepts the following notification options #
[c],[p[m|s]] # where,
#     c : Generate compact notifications. (Saves on bandwidth by
#         not reporting MOs for which values are unknown, not
#         available or, not applicable). By default this option is reset.
#     p : Generate a print of the invariant part of the offending packet. 
#         This can be used to track the packet across the Internet.
#         By default this option is reset.
#     m : Use the MD5 algorithm to generate the packet print.
#         By default this algorithm is used.
#     s : Use the SHA1 algorithm to generate the packet print.
#
# The trap_snmp plugin requires several parameters 
# The parameters depend on the Snmpversion that is used (specified) # For
the SNMPv2c case the parameters will be as follows #  alert, <sensorID>,
[NotificationOptions] , 
#         {trap|inform} -v <SnmpVersion> -p <portNumber> <hostName> 
<community>
#
# For SNMPv2c traps with MD5 digest based packetPrint generation  
#
# output trap_snmp: alert, 7, cpm, trap -v 2c myTrapListener myCommunity # #
For SNMPv2c informs with the 'compact' notification option 
#
#output trap_snmp: alert, 7, c, inform -v 2c myTrapListener myCommunity # #
# For SNMPv3 traps with 
# security name = snortUser 
# security level = authentication and privacy
# authentication parameters :
#           authentication protocol = SHA , 
#           authentication pass phrase = SnortAuthPassword
# privacy (encryption) parameters 
#           privacy protocol = DES, 
#           privacy pass phrase = SnortPrivPassword
#
#output trap_snmp: alert, 7, trap -v 3 -u snortUser -l authPriv -a SHA -A 
SnortAuthPassword -x DES -X SnortPrivPassword myTrapListener #For SNMPv3
informs with authentication and encryption #output trap_snmp: alert, 7,
inform -v 3 -u snortUser -l authPriv -a SHA -A 
SnortAuthPassword -x DES -X SnortPrivPassword myTrapListener

# You can optionally define new rule types and associate one or 
# more output plugins specifically to that type.
#
# This example will create a type that will log to just tcpdump. # ruletype
suspicious # {
#   type log
#   output log_tcpdump: suspicious.log
# }
#
# EXAMPLE RULE FOR SUSPICIOUS RULETYPE:
# suspicious $HOME_NET any -> $HOME_NET 6667 (msg:"Internal IRC Server";) #
# This example will create a rule type that will log to syslog # and a mysql
database. # ruletype redalert # {
#   type alert
#   output alert_syslog: LOG_AUTH LOG_ALERT
#   output database: log, mysql, user=snort dbname=snort host=localhost
# }
#
# EXAMPLE RULE FOR REDALERT RULETYPE
# redalert $HOME_NET any -> $EXTERNAL_NET 31337 (msg:"Someone is being
LEET"; 
\
#   flags:A+;)

#
# Include classification & priority settings
#

include ../share/snort/classification.config

#
# Include reference systems
#

include ../share/snort/reference.config

####################################################################
# Step #4: Customize your rule set
#
# Up to date snort rules are available at http://www.snort.org # # The snort
web site has documentation about how to write your own 
# custom snort rules.
#
# The rules included with this distribution generate alerts based on # on
suspicious activity. Depending on your network environment, your # security
policies, and what you consider to be suspicious, some of # these rules may
either generate false positives ore may be detecting # activity you consider
to be acceptable; therefore, you are # encouraged to comment out rules that
are not applicable in your # environment. # # Note that using all of the
rules at the same time may lead to # serious packet loss on slower machines.
YMMV, use with caution, # standard disclaimers apply. :) # # The following
individuals contributed many of rules in this # distribution. # # Credits:
#   Ron Gula <rgula at ...922...> of Network Security Wizards
#   Max Vision <vision at ...4...>
#   Martin Markgraf <martin at ...923...>
#   Fyodor Yarochkin <fygrave at ...121...>
#   Nick Rogness <nick at ...176...>
#   Jim Forster <jforster at ...176...>
#   Scott McIntyre <scott at ...315...>
#   Tom Vandepoel <Tom.Vandepoel at ...271...>
#   Brian Caswell <bmc at ...950...>
#   Zeno <admin at ...4494...>
#   Ryan Russell <ryan at ...35...>
# 
#=========================================
# Include all relevant rulesets here 
# 
# shellcode, policy, info, backdoor, and virus rulesets are 
# disabled by default.  These require tuning and maintance.  
# Please read the included specific file for more information.
#=========================================

include $RULE_PATH/bad-traffic.rules
include $RULE_PATH/exploit.rules
include $RULE_PATH/scan.rules
include $RULE_PATH/finger.rules
include $RULE_PATH/ftp.rules
include $RULE_PATH/telnet.rules
include $RULE_PATH/rpc.rules
include $RULE_PATH/rservices.rules
include $RULE_PATH/dos.rules
include $RULE_PATH/ddos.rules
include $RULE_PATH/dns.rules
include $RULE_PATH/tftp.rules

include $RULE_PATH/web-cgi.rules
include $RULE_PATH/web-coldfusion.rules
include $RULE_PATH/web-iis.rules
include $RULE_PATH/web-frontpage.rules
include $RULE_PATH/web-misc.rules
include $RULE_PATH/web-client.rules
include $RULE_PATH/web-php.rules

include $RULE_PATH/sql.rules
include $RULE_PATH/x11.rules
include $RULE_PATH/icmp.rules
include $RULE_PATH/netbios.rules
include $RULE_PATH/misc.rules
include $RULE_PATH/attack-responses.rules
include $RULE_PATH/oracle.rules
include $RULE_PATH/mysql.rules
include $RULE_PATH/snmp.rules

include $RULE_PATH/smtp.rules
include $RULE_PATH/imap.rules
include $RULE_PATH/pop3.rules

include $RULE_PATH/nntp.rules
include $RULE_PATH/other-ids.rules
# include $RULE_PATH/web-attacks.rules
# include $RULE_PATH/backdoor.rules
# include $RULE_PATH/shellcode.rules
# include $RULE_PATH/policy.rules
# include $RULE_PATH/porn.rules
# include $RULE_PATH/info.rules
# include $RULE_PATH/icmp-info.rules
# include $RULE_PATH/virus.rules
# include $RULE_PATH/chat.rules
# include $RULE_PATH/multimedia.rules
# include $RULE_PATH/p2p.rules
include $RULE_PATH/experimental.rules
include $RULE_PATH/local.rules






/usr/local/etc/snort.conf: unmodified, readonly: line 1



-------------------------------------------------------
This SF.NET email is sponsored by: eBay
Great deals on office technology -- on eBay now! Click here:
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
_______________________________________________
Snort-users mailing list
Snort-users at lists.sourceforge.net
Go to this URL to change user options or unsubscribe:
https://lists.sourceforge.net/lists/listinfo/snort-users
Snort-users list archive:
http://www.geocrawler.com/redir-sf.php3?list=snort-users




More information about the Snort-users mailing list