[Snort-users] barnyard errors

Bamm Visscher bamm at ...539...
Thu Jul 17 14:06:29 EDT 2003


In your 'configure' is your CPP_FLAGS include -DENABLE_MYSQL?

Bammkkkk

On Thu, Jul 17, 2003 at 04:56:12PM -0400, Scott Renna wrote:
> Would you recommend I drop the version of mysql back down to 3.23?
> Will that solve the problem in this case ?
> 
> Here's what my op_plugbase.c file looks like
> 
> #ifdef ENABLE_MYSQL
> #include "op_acid_db.h"
> #endif
> #include "op_alert_csv.h"
> 
> 
> /* ----------------------- Global Data --------------------------*/
> OutputPluginListNode *outputPlugins = NULL;
> 
> /* ----------------------- Global Functions --------------------------*/
> void LoadOutputPlugins()
> {
>     LogMessage("Loading Built-in Output Plugins...\n");
> 
>     AlertFastOpInit();
>     AlertSyslogOpInit();
>     LogDumpOpInit();
>     LogPcapOpInit();
> #ifdef ENABLE_MYSQL
>     AcidDbOpInit();
> #endif
>     AlertCSVOpInit();
>     return;
> 
> it's located in the src directory right under barnyard...does it need to
> be moved elsewhere?
> 
> 
> ***************************
> Scott Renna
> Head Systems Administrator
> Dynamic Animation Systems
> 703-503-0500
> 
> *************************** 
> 
> -----Original Message-----
> From: Bamm Visscher [mailto:bamm at ...539...] 
> Sent: Thursday, July 17, 2003 4:45 PM
> To: Scott Renna
> Cc: snort-users at lists.sourceforge.net
> Subject: Re: [Snort-users] barnyard errors
> 
> 
> I assume you did this because you are using mysql4?
> 
> Sounds like that may be your problem. If ENABLE_MYSQL isn't defined
> correctly, then barnyard won't know op_acid_db exists:
> 
>   From op_plugbase.c -
>     #ifdef ENABLE_MYSQL
>     #include "op_acid_db.h"
>     #endif
> 
> Bammkkkk
> 
> 
> On Thu, Jul 17, 2003 at 04:41:55PM -0400, Scott Renna wrote:
> > I acutally reconfiged barnyard with the --enable-mysql switch. It 
> > wasn't working initially, then someone else on the list recommended I 
> > locate the lines in the configure file and change them from 
> > mysql_connect to my_connect. After that, I was able to run configure 
> > and install it.
> > 
> > Is that the right way to go about this or no?
> > 
> > Should I give it another go?
> > 
> > 
> > 
> > ***************************
> > Scott Renna
> > Head Systems Administrator
> > Dynamic Animation Systems
> > 703-503-0500
> > 
> > ***************************
> > 
> > -----Original Message-----
> > From: snort-users-admin at lists.sourceforge.net
> > [mailto:snort-users-admin at lists.sourceforge.net] On Behalf Of Bamm 
> > Visscher
> > Sent: Thursday, July 17, 2003 4:25 PM
> > To: snort-users at lists.sourceforge.net
> > Subject: Re: [Snort-users] barnyard errors
> > 
> > 
> > Shot in the dark here, but are you sure mysql was enabled during the 
> > configure and subsequant make? If not, support for the op_acid plugin 
> > may not be there.
> > 
> > Bammkkkk
> > 
> > On Thu, Jul 17, 2003 at 03:51:53PM -0400, Scott Renna wrote:
> > > config hostname: xxxxxx
> > > config interface: dc0
> > > config filter: not port 22
> > > 
> > > processor dp_alert
> > > processor dp_log
> > > processor dp_stream_stat
> > > 
> > > output alert_fast
> > > output log_dump
> > > 
> > > output alert_acid_db: mysql, sensor_id 1, database snort, server
> > > localhost, user root, password xxxxxx  output log_acid_db: mysql, 
> > > database snort, server localhost, user root, password xxxxx, detail 
> > > full
> > > 
> > > 
> > > I will change the user for database logging from root once it's all
> > > good and tidy. Am I supposed to have file names following the 
> > > alert_fast and log_dump items?  Initially I had 
> > > /var/log/snort/fast.alert and /var/log/snort/log.dump
> > > 
> > > Scott
> > > 
> > > 
> > > ***************************
> > > Scott Renna
> > > Head Systems Administrator
> > > Dynamic Animation Systems
> > > 703-503-0500
> > > 
> > > ***************************
> > > 
> > > -----Original Message-----
> > > From: snort-users-admin at lists.sourceforge.net
> > > [mailto:snort-users-admin at lists.sourceforge.net] On Behalf Of Bamm
> > > Visscher
> > > Sent: Thursday, July 17, 2003 3:26 PM
> > > To: snort-users at lists.sourceforge.net
> > > Subject: Re: [Snort-users] barnyard errors
> > > 
> > > 
> > > Can you please include the uncommented portions of your 
> > > barnyard.conf.
> > > 
> > > Bammkkkk
> > > 
> > > On Thu, Jul 17, 2003 at 03:07:49PM -0400, Scott Renna wrote:
> > > > Ok,
> > > > 
> > > > So i took a look at the config file and made some changes, but I'm
> 
> > > > still running into weird errors when starting barnyard:
> > > > 
> > > > -*> Barnyard! <*-
> > > > Version 0.1.0 (Build 17)
> > > > By Andrew R. Baker (andrewb at ...950...)
> > > > and Martin Roesch (roesch at ...1935..., www.snort.org)
> > > > 
> > > > Loading Data Processors...
> > > > dp_alert loaded
> > > > dp_log loaded
> > > > dp_stream_stat loaded
> > > > Loading Built-in Output Plugins...
> > > > Fast Alert plugin initialized
> > > > AlertSyslog initialized
> > > > Log Dump plugin initialized
> > > > LogPcap initialized
> > > > AlertCSV initialized
> > > > Parsing Config file: /usr/local/etc/barnyard.conf
> > > > WARNING /usr/local/etc/barnyard.conf(135) => Unknown output plugin
> 
> > > > "alert_acid_db" referenced, ignoring!WARNING
> > > > /usr/local/etc/barnyard.conf(136) => Unknown output plugin
> > > > "log_acid_db" referenced, ignoring!Archive Directory is NULL
> Config 
> > > > File =/usr/local/etc/barnyard.conf Log
> Dir=/var/log/snort/barnyard/
> > > > Spool Dir=/var/log/snort
> > > > Spool File=snort.alert
> > > > Waldo File=/var/log/snort/waldo.log
> > > > Sid File=/usr/local/etc/snort/sid-msg.map
> > > > Gen File=/usr/local/etc/snort/gen-msg.map
> > > > Hostname=bsdtest
> > > > Interface=dc0
> > > > Filter=not port 22
> > > > Record Number: 0
> > > > Log Flag: 1
> > > > Verbosity Level=0
> > > > File Arg Start: 0
> > > > Dry Run mode enabled
> > > > commandline: barnyard -c /usr/local/etc/barnyard.conf -f
> > > > /var/log/snort.log -g /usr/local/etc/snort/gen-msg.map -s
> > > > /usr/local/etc/snort/sid-msg.map -L /var/log/snort/barnyard/ -w
> > > > /var/log/snort/waldo.log -R 
> > > > 
> > > > 
> > > > 
> > > > Here's the weird part, it says the spool file is snort.alert,
> > > > however,
> > > 
> > > > my command line specifies that the spool file should be 
> > > > /var/log/snort.log
> > > > 
> > > > Is there a good site or forum for troubleshooting Barnyard?  
> > > > Anyone got some ideas?
> > > > 
> > > > Scott
> > > > ***************************
> > > > Scott Renna
> > > > Head Systems Administrator
> > > > Dynamic Animation Systems
> > > > 703-503-0500
> > > > 
> > > > ***************************
> > > >
> > > 
> > > 
> > > -------------------------------------------------------
> > > This SF.net email is sponsored by: VM Ware
> > > With VMware you can run multiple operating systems on a single
> > > machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual 
> > > machines at the same time. Free trial click here: 
> > > http://www.vmware.com/wl/offer/345/0
> > > _______________________________________________
> > > Snort-users mailing list
> > > Snort-users at lists.sourceforge.net
> > > Go to this URL to change user options or unsubscribe:
> > > https://lists.sourceforge.net/lists/listinfo/snort-users
> > > Snort-users list archive:
> > > http://www.geocrawler.com/redir-sf.php3?list=snort-users
> > 
> > 
> > -------------------------------------------------------
> > This SF.net email is sponsored by: VM Ware
> > With VMware you can run multiple operating systems on a single 
> > machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual 
> > machines at the same time. Free trial click here: 
> > http://www.vmware.com/wl/offer/345/0
> > _______________________________________________
> > Snort-users mailing list
> > Snort-users at lists.sourceforge.net
> > Go to this URL to change user options or unsubscribe:
> > https://lists.sourceforge.net/lists/listinfo/snort-users
> > Snort-users list archive:
> > http://www.geocrawler.com/redir-sf.php3?list=snort-users




More information about the Snort-users mailing list